Company News
Company updates, product announcements, and industrial automation news from Vibocnc.
Featured
FANUC CRX-3iA Debuts as an 11 kg Portable Collaborative Robot
FANUC is showing the compact CRX-3iA at Automate 2026, including a portable vertical-up welding demonstration on structural steel.
FANUC R-2000/E Series: What the Next-Generation Robot Changes
FANUC is debuting the R-2000/E series with eight configurations, higher axis speeds, more wrist-load capacity and a smaller installation footprint.
Latest Articles
FANUC Physical AI at Automate 2026: Five Factory-Floor Lessons
FANUC is combining 3D vision, adaptive motion, simulation, ROS 2 and generative interfaces in its Automate 2026 demonstrations.
FANUC R-50iA Controller Adds Certified Cybersecurity and New Vision
The R-50iA robot controller combines IEC 62443 certification, higher-resolution vision, Python support, energy features and remote service tools.
FANUC ROBOGUIDE V10 Modernizes Offline Robot Simulation
ROBOGUIDE V10 adds a 64-bit architecture, VR support, improved CAD import and a redesigned interface for offline robot-cell development.
FANUC M-950iA/500 Expands Serial-Link Heavy-Payload Handling
The M-950iA/500 combines a 500 kg payload, 2,830 mm reach and serial-link motion for heavy handling in constrained production layouts.
FANUC M-800iB/60-20B Targets High-Accuracy Laser Processing
FANUC is demonstrating the M-800iB/60-20B in an integrated laser-cutting cell focused on speed, accuracy and path control.
FANUC SR-3iA/U Brings SCARA Motion to a Ceiling-Mount Layout
The SR-3iA/U ceiling-mount SCARA is designed around a 360-degree work envelope for compact assembly, picking and packaging cells.
FANUC and OTTO Demonstrate Mobile Robotic Order Fulfillment
A ProMat 2025 demonstration combines a FANUC CRX-10iA/L cobot with OTTO autonomous mobile robotics for flexible warehouse fulfillment.
FANUC P-55/15-21A Paint Robot Adopts the R-50iA Controller
FANUC says the P-55/15-21A is its first paint robot to use the R-50iA controller, with a consolidated cabinet and batteryless encoders.
FANUC Series 15-M SV026 and SV027 Alarm Repair After Battery Replacement
A FANUC Series 15-M CNC may display SV026 ILLEGAL AXIS ARRANGE and SV027 ILL DGTL SERVO PARAMETER alarms after the battery is replaced while the controller is powered off. This article explains the possible causes, important parameters to check, and how to recover the machine when no parameter backup is available.
Troubleshooting G41 Tool Radius Compensation on CNC Programs
A practical guide to diagnosing why G41 may move the tool without applying the expected cutter radius compensation during approach and arc machining.