Peças de automação industrial
Explore peças CNC e de automação industrial com entrega mundial.
Pesquisar produtos
Categorias
Mitsubishi SC-BKC1JCBL5M-A2-H 5 m High-Flex Electromagnetic Brake Cable for MELSERVO Servo Motors
SKU: SC-BKC1JCBL5M-A2-H
The Mitsubishi SC-BKC1JCBL5M-A2-H is a 5-meter electromagnetic brake cable assembly for Mitsubishi general-purpose AC servo systems. It connects the brake circuit between a servo motor and its servo amplifier, using a right-angle servo motor connector and a servo amplifier connector. The -H suffix denotes long bending life for moving parts, so the cable is suited to axes that flex repeatedly rather than fixed wiring. The A2 suffix indicates cable exit on the side opposite the load. When mated to a compatible servo motor, the connectors provide IP67 protection against dust and water ingress; the overall machine rating depends on the lower-rated component. The assembly is intended for MELSERVO servo systems, including MR-JN, MR-J3, MR-J4 and MR-J5 series controllers, and is used where a servo motor's holding brake must be wired through a protected, flexible connection. It is a brake cable only; additional power and encoder cables are required to complete the servo motor connection.
Mitsubishi SC-BKC21JCBL4M-SBH High-Flex Electromagnetic Brake Cable for MELSERVO Servo Systems
SKU: SC-BKC21JCBL4M-SBH
The Mitsubishi SC-BKC21JCBL4M-SBH is a high-flex electromagnetic brake cable designed for Mitsubishi MELSERVO servo systems. It connects the brake circuit at the servomotor junction, carrying the brake conductors between the servomotor and servo amplifier in applications where a servo axis uses an electromagnetic brake. The cable assembly is 4 m long and has an IP65 protection rating. It is fitted with a right-angle servomotor connector and a servo amplifier connector, helping with routing in constrained machine layouts. The high-flex construction provides elevated flex life for installation conditions that involve repeated cable movement. Typical applications include servo-driven machinery, automated equipment, and axis wiring that requires a 4 m brake cable with right-angle motor connection and IP65 protection. The part is intended for compatible MELSERVO servo installations requiring an electromagnetic brake cable with these connection and protection characteristics.
Mitsubishi SC-BKC2CBL15M-SBH High-Flex Servomotor Brake Cable for MELSERVO Systems
SKU: SC-BKC2CBL15M-SBH
The Mitsubishi SC-BKC2CBL15M-SBH is a high-flex servomotor brake cable set for direct connection between a servo motor and its electromagnetic brake circuit. It has a 15 m cable, a right-angle servomotor connector, and free terminal leads for termination at the drive or terminal block. The brake conductors are integrated into the cable assembly, so the motor brake can be connected without a separate brake cable run. Its high-flex construction is intended for applications with repeated flexing and a long flex life. The connector assembly is rated IP65 for protection against dust and water ingress in suitable installations. This cable is used in Mitsubishi servo systems, including MELSERVO applications, where a servo motor with an electromagnetic brake requires a replacement or new brake cable. The right-angle connector supports compact routing at the motor, while the flying leads simplify wiring at the cabinet end. It is suitable for maintenance, replacement, and machine-build projects that require the original 15 m length, IP65 protection, and right-angle connector orientation. Check the part number, cable length, and connector details before ordering.
Mitsubishi SC-BKS1CBL10M-A1-H Servo Motor Electromagnetic Brake Cable for MELSERVO MR-J4/JN
SKU: SC-BKS1CBL10M-A1-H
The Mitsubishi SC-BKS1CBL10M-A1-H is an electromagnetic brake cable for Mitsubishi MELSERVO servo motors. It is designed for MR-J4/JN cable applications and is listed for use with HF-KN, HG-KR, and HG-MR servo motors. The cable measures 10 m and uses the A1 configuration, with the cable routed from the motor load side. Its H suffix denotes high bending life, making it suitable for applications where the cable is subjected to repeated flexing. The assembly provides the connection required for the servo motor's holding brake, supporting controlled brake release and engagement in machine motion systems. It is used in servo-driven equipment such as positioning axes, machine tools, packaging machinery, and other automated motion applications that rely on Mitsubishi MELSERVO drives and servo motors. The part is identified as SC-BKS1CBL10M-A1-H and belongs to the SC-BKS1CBL series of brake cables. For correct selection, confirm the servo motor series, cable length, and A1/A2 routing requirement.
Mitsubishi SC-BKS1CBL3M-A2-L Electromagnetic Brake Cable for HF/HG Servo Motors
SKU: SC-BKS1CBL3M-A2-L
The Mitsubishi SC-BKS1CBL3M-A2-L (SC-BKS1CBL3M-A2-L) is an electromagnetic brake cable for Mitsubishi HF and HG series servo motors. It is intended for HF-KE, HF-KN, HF-KP, HF-MP, HG-KN, HG-KR and HG-MR motors, providing the brake wiring connection when an electromagnetic brake is fitted. The model uses the A2 cable lead-out direction, and the L suffix identifies the standard bending-life version. Mitsubishi notes that H and L suffixes distinguish long and standard bending life, while A1 through A4 suffixes define the cable lead-out direction, so these details should be checked against the actual motor installation. This brake cable is intended for maintenance and replacement of the brake wiring connection on compatible Mitsubishi servo motors with electromagnetic brakes. Confirm the motor series, correct connector arrangement and required cable direction before ordering the part.
Mitsubishi SC-BKS1CBL8M-A1-L Electromagnetic Brake Cable for HF-KP/HF-MP Servomotors
SKU: SC-BKS1CBL8M-A1-L
The Mitsubishi SC-BKS1CBL8M-A1-L (SC-BKS1CBL8M-A1-L) is an electromagnetic brake cable assembly designed for direct connection to Mitsubishi HF-KP and HF-MP servomotors. It carries the conductors required for the motor holding brake and is supplied as an 8 m cable with a right-angle servomotor connector at one end and free terminal leads at the other, allowing the brake circuit to be terminated in the control cabinet. The cable has an IP65 protection rating and an A1 load-side cable exit; the L suffix identifies the standard-flex version. Its preassembled construction simplifies wiring of braked servo axes and helps keep the brake conductors separate and reliably routed. Typical applications include servo-driven machinery and automation equipment that uses HF-KP or HF-MP motors with electromagnetic brakes, where a ready-made cable reduces installation time and avoids field assembly of the motor connector. The part is identified as SC-BKS1CBL8M-A1-L and is suitable for maintenance, replacement, or new build requirements. Verify the motor series and required cable length against the machine documentation before ordering.
Mitsubishi SC-BKS1JCBL3M-A1-S 3 m Electromagnetic Brake Cable for HG Series Servo Motors
SKU: SC-BKS1JCBL3M-A1-S
The Mitsubishi SC-BKS1JCBL3M-A1-S is a 3 m electromagnetic brake cable assembly for connecting the brake circuit of compatible HG-series servo motors to a Mitsubishi servo amplifier. It is used on servo axes with a motor holding brake, providing a dedicated brake wiring connection alongside the motor power and encoder circuits. The cable is a load-side lead type with a right-angle servo motor connector and a servo amplifier connector, and it is rated IP65 when mated with the corresponding servo motor or amplifier. Its ultra-high flex design provides a long flex life for repeated movement in servo-driven machinery. The assembly is compatible with Mitsubishi HG-KR, HG-MR, HG-KN, HG-KP and HG-MP series servo motors and matching MELSERVO servo amplifier systems. Typical applications include machine tools, packaging equipment, material-handling axes and other motion-control systems that require reliable electromagnetic brake wiring. The model and part number are SC-BKS1JCBL3M-A1-S.
Mitsubishi SC-BKS1JCBL7M-A1-H Servo Motor Electromagnetic Brake Cable for HG Series
SKU: SC-BKS1JCBL7M-A1-H
The Mitsubishi SC-BKS1JCBL7M-A1-H (SC-BKS1JCBL7M-A1-H) is a 7 m electromagnetic brake cable assembly intended for connecting the brake circuit of compatible Mitsubishi servo motors. It uses a high-flex construction for long bending life and is suitable for load-side lead and lead-out routing where continuous movement can stress ordinary cables. The cable has an IP65 protection rating, helping it withstand dust and water exposure in machine environments. It is compatible with Mitsubishi HG-KR, HG-MR, HG-KN, HG-KP, and HG-MP series servo motors. This brake cable carries the electromagnetic brake conductors between the motor and its drive system, supporting controlled holding and release of the servo motor brake in equipment such as robots, machine tools, and compact motion axes. The 7 m length gives layout flexibility when the motor and control cabinet are separated. Use it as a replacement or service part for compatible Mitsubishi servo systems where a durable, high-flex brake cable is required. Verify the exact motor series and connector arrangement before ordering.
Mitsubishi SC-E5EW-S10M CC-Link IE Cat 5e Shielded Ethernet Cable 10 m for MELSEC
SKU: SC-E5EW-S10M
The Mitsubishi SC-E5EW-S10M is a 10 m (32 ft) Category 5e Ethernet cable from the SC-E5EW series, designed for indoor industrial network connections. It is a double-shielded STP straight cable with four twisted pairs and eight core wires. The shielding combines aluminum/polyester tape with a tin-plated annealed copper braid, helping protect CC-Link IE and Ethernet communications in electrically noisy control environments. Shielded straight RJ-45 connectors terminate both ends. The cable supports 1000BASE-T according to IEEE 802.3 and conforms to ANSI/TIA/EIA-568-B Category 5e. Its flame-retardant PVC outer sheath has a nominal finished outside diameter of 6.8 mm, and the assembly is intended for indoor installation. It is used with Mitsubishi Electric MELSEC programmable controllers and CC-Link IE / CC-Link IE TSN networks to connect field devices, PLC modules, switches, and other compatible equipment. Typical applications include indoor field-device connections, machinery networking, and Ethernet or CC-Link IE links between compatible automation devices.
Mitsubishi SC-E5EW-S10M-L Cat 5e Double-Shielded Ethernet Cable for CC-Link IE TSN 10 m
SKU: SC-E5EW-S10M-L
The Mitsubishi SC-E5EW-S10M-L (SC-E5EW-S10M-L) is a 10 m Category 5e double-shielded (STP) straight Ethernet cable from the SC-E5EW series, designed for reliable CC-Link IE TSN and MELSEC network connections in factory automation. It uses eight wires in four twisted pairs with an aluminum/polyester tape and tinned annealed copper braid double shield, terminated with shielded RJ-45 connectors in a straight wiring configuration. The -L variant is intended for indoor and outdoor installation and has a LAP sheath with a finished outside diameter of approximately 10 mm. It conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, supporting 1000BASE-T Ethernet links where shielding performance and outdoor routing are required. Typical applications include connecting Mitsubishi MELSEC programmable controllers, CC-Link IE TSN devices, network switches and field devices in control cabinets and outdoor field wiring runs. This 10 m length is referenced as equivalent to SCE5EWS10M in the available product data.
Mitsubishi SC-E5EW-S10M-MV Shielded Cat 5e Ethernet Cable for CC-Link IE TSN 10 m
SKU: SC-E5EW-S10M-MV
The Mitsubishi SC-E5EW-S10M-MV (SC-E5EW-S10M-MV) is a 10 m (32 ft) shielded Category 5e Ethernet cable from the SC-E5EW series, designed for indoor field-device connections in Mitsubishi Electric control systems. It supports Ethernet and CC-Link communication, including CC-Link IE TSN networks, and is suitable for MELSEC programmable controllers and other PLC-based equipment. The flexible cable uses four twisted pairs with double shielding—aluminum/polyester tape plus tinned annealed copper braid—and terminates in shielded straight RJ-45 connectors. It conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, with a flame-retardant PVC jacket and an outside diameter of 6.5 mm. The 10 m length is intended for indoor movable areas, where the cable can be used for field devices, control panels and network wiring. It is equivalent to SCE5EWS10MMV.
Mitsubishi SC-E5EW-S11M Double-Shielded Cat 5e Ethernet Cable for CC-Link IE TSN/IE Field 11 m
SKU: SC-E5EW-S11M
The Mitsubishi SC-E5EW-S11M (SC-E5EW-S11M) is a double-shielded Category 5e Ethernet cable designed for indoor field-device connections in CC-Link IE TSN and CC-Link IE Field networks. It is an 11 m (36 ft) straight cable with eight wires arranged as four twisted pairs and shielded RJ-45 connectors at both ends, supporting IEEE 802.3 1000BASE-T communication. The double-shield construction combines aluminum/polyester tape with a tin-plated annealed copper braid, helping protect signals from external noise in control cabinets and indoor automation environments. The cable has a flame-retardant PVC jacket with a finished outside diameter of 6.8 mm and is suitable for indoor installation. It is used with Mitsubishi Electric MELSEC programmable controllers and compatible CC-Link IE equipment to link field devices and Ethernet-enabled devices. The part is equivalent to SCE5EWS11M and belongs to the SC-E5EW series as the 11 m length variant.
Mitsubishi SC-E5EW-S13M Cat 5e Shielded Ethernet Cable for MELSEC PLCs and CC-Link IE TSN
SKU: SC-E5EW-S13M
The Mitsubishi SC-E5EW-S13M (SC-E5EW-S13M) is a 13 m (42 ft) Category 5e shielded Ethernet cable and cordset for indoor field devices and control-cabinet wiring. It is part of the SC-E5EW series, is equivalent to SCE5EWS13M, and provides Ethernet and CC-Link communication capability for MELSEC PLC systems and CC-Link IE TSN or CC-Link IE Field networks. The cable is a double-shielded STP straight cable with eight wires arranged as four twisted pairs. Its shielding combines aluminum/polyester tape with a tin-plated annealed copper braid, while the flame-retardant PVC jacket has a finished outside diameter of 6.8 mm. Shielded RJ-45 connectors are straight-wired, and the assembly conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. The 13 m length falls within the 1 m to 45 m range specified for indoor movable installations and suits connections between PLCs, network devices and field equipment in factory automation systems.
Mitsubishi SC-E5EW-S15M Shielded Cat 5e Ethernet/CC-Link Cable 15 m
SKU: SC-E5EW-S15M
The Mitsubishi SC-E5EW-S15M (SC-E5EW-S15M) is a shielded Category 5e Ethernet cable/cordset designed for indoor field devices in CC-Link IE Field networks. It provides Ethernet and CC-Link communication capability in a 15 m (49 ft) assembly, making it suitable for connecting MELSEC programmable logic controllers, remote I/O and compatible field equipment inside control cabinets or machine enclosures. The cable uses four twisted pairs (eight wires) with double shielding: aluminum/polyester tape plus tin-plated annealed copper braid. Shielded straight RJ-45 connectors are fitted at both ends. The flame-retardant PVC jacket has an outside diameter of 6.8 mm. The assembly conforms to IEEE 802.3 1000BASE-T and ANSI/TIA/EIA-568-B Category 5e, and it is intended for indoor installations. It is equivalent to SCE5EWS15M. Typical applications include PLC-to-PLC links, PLC-to-field-device connections and CC-Link IE Field network wiring where a fixed 15 m shielded Cat 5e cordset is required.
Mitsubishi SC-E5EW-S15M-L Cat 5e Double-Shielded Ethernet Cable for CC-Link IE Field 15 m
SKU: SC-E5EW-S15M-L
The Mitsubishi SC-E5EW-S15M-L is a 15 m Cat 5e double-shielded Ethernet cable assembly in the SC-E5EW series, intended for CC-Link IE Field and CC-Link IE TSN network communications. Its -L variant is designed for indoor and outdoor installation and uses a LAP sheath with a finished outside diameter of 10 mm. The cable is a straight, Category 5e or higher STP construction with eight wires arranged in four twisted pairs. Shielding combines aluminum/polyester tape with a tin-plated annealed copper braid, helping suppress external noise and supporting use in EMI-sensitive Ethernet installations. Both ends are terminated with shielded RJ-45 straight connectors. The assembly conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, and it has passed the CC-Link Partner Association recommended-product test. It is suitable for connecting CC-Link IE Field and CC-Link IE TSN devices, including MELSEC programmable controller networks, where a fixed 15 m cable run with strong shielding is required. The cable measures 15 m (approximately 49 ft).
Mitsubishi SC-E5EW-S15M-MV Shielded Cat 5e Ethernet Cable for CC-Link IE Field, 15 m
SKU: SC-E5EW-S15M-MV
The Mitsubishi SC-E5EW-S15M-MV is a 15 m shielded Category 5e Ethernet cable and cordset from the SC-E5EW series, intended for indoor field devices. It is a flexible, double-shielded STP straight cable with eight wires arranged as four twisted pairs and shielded RJ-45 straight connectors. The double shield combines aluminum/polyester tape with a tin-plated annealed copper braid, supporting reliable signal transmission. The cable has a flame-retardant PVC jacket and an outside diameter of 6.5 mm in this indoor movable version. It supports Ethernet and CC-Link communication, conforms to IEEE 802.3 1000BASE-T and ANSI/TIA/EIA-568-B Category 5e, and is classified as a CC-Link IE Field cable. Typical applications include connecting Mitsubishi Electric MELSEC programmable controllers and field devices in CC-Link IE Field networks, particularly on indoor movable machinery where a flexible 15 m cable is required. The part is equivalent to SCE5EWS15MMV.
Mitsubishi SC-E5EW-S17M 17 m Double-Shielded Cat 5e Ethernet Cable for CC-Link IE TSN
SKU: SC-E5EW-S17M
The Mitsubishi SC-E5EW-S17M is a 17 m (55 ft) shielded Category 5e Ethernet cable and cordset for indoor field devices. Part of the SC-E5EW series, it supports Ethernet and CC-Link communication, including CC-Link IE TSN networks used with MELSEC programmable controllers. Its double-shielded STP construction combines aluminum/polyester tape with a tin-plated annealed copper wire braid around four twisted pairs. The cable has eight cores, shielded straight RJ-45 connectors, and a flame-retardant PVC jacket with a finished outside diameter of 6.8 mm. It is compliant with IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801, and is intended for indoor installation. Typical applications include connecting controllers, network devices, and field equipment within control cabinets and other indoor control areas. The SC-E5EW-S17M is equivalent to SCE5EWS17M.
Mitsubishi SC-E5EW-S1M-L Cat 5e Double-Shielded Indoor/Outdoor Ethernet Cable for CC-Link IE TSN
SKU: SC-E5EW-S1M-L
The Mitsubishi SC-E5EW-S1M-L (SC-E5EW-S1M-L) is a 1 m Category 5e double-shielded Ethernet cable from the SC-E5EW series, supplied with shielded RJ-45 connectors for straight-through connection. Its double shielding combines aluminum/polyester tape with a tin-plated annealed copper braid, and the eight-core construction uses four twisted pairs. The cable is rated for IEEE 802.3 1000BASE-T and conforms to ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. The -L version has a LAP sheath with a finished outside diameter of 10 mm and is intended for indoor or outdoor installation. It is used to connect Mitsubishi Electric MELSEC programmable controllers, compatible network devices and field equipment on CC-Link IE TSN and CC-Link IE Field networks. The 1 m length is useful for short panel-to-panel or device-to-device links, while the shielded construction helps maintain signal integrity in electrically noisy environments. Typical applications include factory automation networks, control cabinets and outdoor cable runs between Ethernet-enabled automation equipment. The cable operates as part of a 1000BASE-T network and provides a reliable physical connection where a durable, double-shielded Cat 5e cable is required.
Mitsubishi SC-E5EW-S1M-MV 1 m Cat 5e Double-Shielded Ethernet Cable for CC-Link IE TSN
SKU: SC-E5EW-S1M-MV
The Mitsubishi SC-E5EW-S1M-MV is a 1 m Cat 5e double-shielded Ethernet cable and cordset for indoor field devices, designed for movable indoor areas and CC-Link IE TSN networks. It is part of the SC-E5EW series and is equivalent to SCE5EWS1MMV. The cable uses a Category 5e or higher straight STP construction with eight wires in four twisted pairs. Its double shielding combines aluminum/polyester tape with a tin-plated annealed copper wire braid, while the flame-retardant PVC jacket has a finished outside diameter of 6.5 mm. Shielded RJ-45 connectors are wired straight for direct connection to compatible ports. The assembly conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, supporting 1000BASE-T communication in MELSEC and CC-Link IE TSN applications. It is suitable for connecting PLCs, network modules, controllers and other field devices where a flexible, shielded 1 m Ethernet cordset is required.
Mitsubishi SC-E5EW-S20M-L Shielded Category 5e Ethernet Cable for CC-Link IE TSN 20 m
SKU: SC-E5EW-S20M-L
The Mitsubishi SC-E5EW-S20M-L is a 20 m (65 ft) shielded Category 5e Ethernet cable and cordset intended for indoor/outdoor field-device connections. It is part of the SC-E5EW series, a double-shielded STP straight cable with eight wires arranged as four twisted pairs. The double shield combines aluminum/polyester tape with a tin-plated annealed copper braid, and the -L version uses a LAP sheath with a finished outside diameter of 10 mm. Shielded RJ-45 connectors provide straight-through connection. The cable is built for Ethernet and CC-Link communication, including CC-Link IE TSN and CC-Link IE Field networks, and conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801. Its shielding helps maintain signal integrity in electrically noisy control environments. Typical applications include connecting MELSEC programmable controllers, remote I/O, drives, and other field devices over 20 m runs in indoor or outdoor installations. The SC-E5EW series is available in various lengths up to 100 m; this version is the 20 m model.
Mitsubishi SC-E5EW-S20M-MV Cat 5e Shielded Ethernet Cable for CC-Link IE 20 m
SKU: SC-E5EW-S20M-MV
The Mitsubishi SC-E5EW-S20M-MV is a 20 m (65 ft) Cat 5e shielded Ethernet cable and cordset from the SC-E5EW series, intended for indoor field devices and movable cable runs. It is a flexible, double-shielded STP straight cable with eight wires arranged as four twisted pairs. The double shield combines aluminum/polyester tape with a tin-plated annealed copper wire braid, helping protect signal transmission in electrically noisy factory environments. The cable terminates in shielded RJ-45 connectors wired straight through. It supports Ethernet and CC-Link communication and conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. The flame-retardant PVC jacket has a finished outside diameter of 6.5 mm. The 20 m length suits indoor movable installations, where the SC-E5EW series permits lengths from 1 m to 45 m. Typical uses include connecting Mitsubishi MELSEC programmable controllers, CC-Link IE and CC-Link IE TSN network devices, remote I/O and other field equipment. The cable is listed as equivalent to SCE5EWS20MMV.
Mitsubishi SC-E5EW-S25M CC-Link IE Cat 5e Ethernet Cable 25 m for MELSEC PLCs
SKU: SC-E5EW-S25M
The Mitsubishi SC-E5EW-S25M (SC-E5EW-S25M) is a 25-meter CC-Link IE Ethernet cable from the SC-E5EW series, terminated with shielded RJ-45 connectors for straight-through connection. It uses Category 5e or higher double-shielded STP construction with eight wires arranged as four twisted pairs. The double shield combines aluminum/polyester tape with a tin-plated annealed copper wire braid, helping protect high-speed Ethernet and CC-Link IE communications from electromagnetic interference. The cable has a flame-retardant PVC jacket with a finished outside diameter of 6.8 mm and is intended for indoor installation. Designed for Mitsubishi MELSEC programmable logic controllers and CC-Link IE field networks, the SC-E5EW-S25M supports 1000BASE-T Ethernet links and conforms to IEEE 802.3 1000BASE-T and ANSI/TIA/EIA-568-B Category 5e requirements. The 25 m length suits panel-to-panel, controller-to-switch and indoor field-device connections in factory automation systems, including CC-Link IE TSN networks. Shielded RJ-45 connectors at both ends provide a secure, straight connection for PLC networking and machine-to-machine data exchange. Its double-shielded construction and 8-wire twisted-pair design make it suitable for reliable indoor Ethernet cabling in industrial control cabinets and production equipment.
Mitsubishi SC-E5EW-S25M-MV Cat 5e Double-Shielded Ethernet Cable 25 m for MELSEC / CC-Link IE
SKU: SC-E5EW-S25M-MV
The Mitsubishi SC-E5EW-S25M-MV (SC-E5EW-S25M-MV) is a 25 m (82 ft) Category 5e double-shielded Ethernet cable from the SC-E5EW series, designed as an indoor field-device cable and cordset for Ethernet and CC-Link communication. It is equivalent to SCE5EWS25MMV. It is a flexible straight cable with eight wires arranged as four twisted pairs, an aluminum/polyester tape and tin-plated annealed copper wire braid double shield, and shielded RJ-45 straight connectors. The cable is 1000BASE-T compliant and conforms to IEEE 802.3, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, supporting reliable data transmission in electrically noisy control environments. The -MV variant has a flame-retardant PVC sheath with a finished outside diameter of 6.5 mm and is intended for indoor movable installation areas, with a 25 m length available within the series' 1 m to 45 m range for this variant. It is commonly used to connect field devices, PLCs and network equipment in Mitsubishi MELSEC and CC-Link IE systems. The double shield helps protect high-speed Ethernet signals from external noise, making the cable suitable for machine control, production equipment and other factory-floor network wiring where a durable, shielded Cat 5e assembly is required.
Mitsubishi SC-E5EW-S2M Cat 5e Double-Shielded Ethernet Cable for CC-Link IE 2 m
SKU: SC-E5EW-S2M
The Mitsubishi SC-E5EW-S2M is a 2 m (6 ft) Cat 5e indoor Ethernet cable assembly from the SC-E5EW series, designed for field devices in Mitsubishi Electric PLC and CC-Link IE network installations. It uses a double-shielded STP construction with aluminum/polyester tape and a tin-plated annealed copper wire braid, plus eight wires arranged as four twisted pairs. The straight cable terminates in shielded RJ-45 connectors and has a flame-retardant PVC jacket with a finished outside diameter of 6.8 mm. It conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801, and its wire section is listed to UL AWM Style 20276. The assembly supports Ethernet and CC-Link IE communication and is intended for indoor installation. Typical uses include connecting PLCs and other field devices on CC-Link IE or Ethernet networks that require a fixed, shielded Cat 5e cordset. The cable is equivalent to SCE5EWS2M.
Mitsubishi SC-E5EW-S2M-L Cat 5e Double-Shielded Ethernet Cable for CC-Link IE TSN, 2 m
SKU: SC-E5EW-S2M-L
The Mitsubishi SC-E5EW-S2M-L (SC-E5EW-S2M-L) is a 2 m Category 5e double-shielded Ethernet cable from the SC-E5EW series, designed for CC-Link IE TSN and other 1000BASE-T networks in factory automation. Its outdoor-rated LAP sheath and shielded RJ-45 straight connectors suit field devices installed indoors or outdoors. The cable contains four twisted pairs (eight wires) with aluminum/polyester tape and a tin-plated annealed copper braid for double shielding. It has a finished outside diameter of 10 mm and is built as a straight Cat 5e or higher STP cable. It conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. Typical applications include connecting Mitsubishi MELSEC programmable controllers, CC-Link IE TSN devices and outdoor field equipment where reliable shielded communication is required. Its 2 m length is suitable for short runs between control cabinets, network modules and field devices.
Mitsubishi SC-E5EW-S2M-MV Shielded Cat 5e Ethernet Cable 2 m for CC-Link IE
SKU: SC-E5EW-S2M-MV
The Mitsubishi SC-E5EW-S2M-MV is a 2 m shielded Category 5e Ethernet cable assembly designed for CC-Link IE TSN and CC-Link IE Field network wiring in MELSEC-based systems. It uses a double-shielded STP construction with eight wires in four twisted pairs, an aluminum/polyester tape plus tin-plated annealed copper braid, and straight shielded RJ-45 connectors. The cable is rated for Category 5e or higher and conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801. Its flame-retardant PVC jacket has a finished outside diameter of 6.5 mm, and the assembly is intended for indoor movable installation, making it suitable for control panels, machine-to-machine Ethernet links, remote I/O, drives, and field devices where flexible routing is required. The 2 m length helps simplify wiring in compact cells and moving equipment sections while maintaining shielded Gigabit Ethernet connectivity.
Mitsubishi SC-E5EW-S30M 30 m Shielded Cat5e Ethernet Cable for CC-Link IE Field Network
SKU: SC-E5EW-S30M
The Mitsubishi SC-E5EW-S30M (SC-E5EW-S30M) is a 30 m (98 ft) shielded Category 5e Ethernet cable and cordset for indoor field devices in CC-Link IE and Ethernet networks. It is a double-shielded STP straight cable with eight wires arranged as four twisted pairs; the shield combines aluminum/polyester tape with a tin-plated annealed copper wire braid. Both ends have shielded RJ-45 connectors in a straight connection, so the factory-made assembly can link compatible PLCs and other CC-Link IE field equipment. The cable is 1000BASE-T compliant and is specified for IEEE 802.3 1000BASE-T and ANSI/TIA/EIA-568-B Category 5e cabling. Its flame-retardant PVC jacket has a finished outside diameter of 6.8 mm, and the construction is intended for indoor installation. The 30 m length suits cabinet-to-cabinet and field-device runs where a ready-made shielded cordset is preferred. It is equivalent to SCE5EWS30M and belongs to the Mitsubishi Electric SC-E5EW cable series.
Mitsubishi SC-E5EW-S30M-L Outdoor Shielded Cat 5e Ethernet Cable Set for MELSEC and CC-Link IE TSN, 30 m
SKU: SC-E5EW-S30M-L
The Mitsubishi SC-E5EW-S30M-L is a 30 m (98 ft) shielded Category 5e Ethernet cable set from the SC-E5EW series, designed for outdoor field devices and industrial network connections. It is equivalent to SCE5EWS30ML and provides Ethernet and CC-Link communication capability for Mitsubishi Electric MELSEC and CC-Link IE network environments. The cable contains eight wires in four twisted pairs and uses a double shield made of aluminum/polyester tape and tin-plated annealed copper braid, which helps suppress EMI and external noise in multi-cable installations. The outdoor -L version has a LAP sheath with a finished outside diameter of 10 mm and is terminated with shielded straight RJ-45 connectors. It conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801. Typical uses include outdoor field devices, CC-Link IE TSN and CC-Link IE Field wiring, and noise-sensitive Ethernet runs in MELSEC automation systems, cabinets, and machines where a 30 m cable assembly is required.
Mitsubishi SC-E5EW-S30M-MV Shielded Cat 5e Ethernet Cable for CC-Link IE TSN
SKU: SC-E5EW-S30M-MV
The Mitsubishi SC-E5EW-S30M-MV (SC-E5EW-S30M-MV) is a 30 m / 98 ft shielded Category 5e Ethernet cable and cordset for indoor field devices. It belongs to the SC-E5EW series and is intended for Mitsubishi MELSEC control systems and CC-Link IE TSN networks, with Ethernet and CC-Link communication capability. The cable is a flexible, double-shielded STP straight cable with eight wires arranged in four twisted pairs. Its shielding combines aluminum/polyester tape with a tin-plated annealed copper wire braid, helping resist external noise and EMI in multi-cable installations. Both ends are terminated with shielded RJ-45 straight connectors. The flame-retardant PVC jacket has a finished outside diameter of 6.5 mm, which suits the -MV indoor movable version. Electrical performance conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. Typical applications include factory automation equipment, moving machine sections and PLC-to-network connections where a 30 m shielded Cat 5e cordset is required. It is equivalent to SCE5EWS30MMV.
Mitsubishi SC-E5EW-S33M Cat 5e Shielded Ethernet Cable for CC-Link IE TSN 33 m
SKU: SC-E5EW-S33M
The Mitsubishi SC-E5EW-S33M is a 33 m (108 ft) Category 5e shielded Ethernet cable and cordset designed for indoor field devices in Mitsubishi Electric factory automation networks. It is part of the SC-E5EW series and is equivalent to SCE5EWS33M. The cable uses a double-shielded STP construction with eight wires in four twisted pairs, combining aluminum/polyester tape and a tin-plated annealed copper wire braid. Its flame-retardant PVC sheath has a finished outside diameter of 6.8 mm, and the cable is terminated with shielded RJ-45 connectors in a straight connection. The SC-E5EW-S33M complies with IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801. It supports Ethernet and CC-Link communication and is suitable for CC-Link IE TSN networks using MELSEC programmable controllers. Typical applications include connecting PLCs, I/O devices, and other field equipment in indoor control cabinets and factory automation systems where reliable gigabit Ethernet and shielded signal transmission are required.
Mitsubishi SC-E5EW-S35M Cat 5e Double-Shielded Ethernet Cable for CC-Link IE 35 m
SKU: SC-E5EW-S35M
The Mitsubishi SC-E5EW-S35M is a 35 m (114 ft) Category 5e Ethernet cable from the SC-E5EW series, intended for indoor field-device and control-network connections. It uses a double-shielded STP construction with four twisted pairs (eight wires), aluminum/polyester tape and a tin-plated annealed copper braid, terminating in shielded straight RJ-45 connectors at both ends. The flame-retardant PVC jacket has a nominal outside diameter of 6.8 mm. Its double shield provides strong shielding performance for high-speed Ethernet signals in electrically noisy factory environments. The cable is compliant with IEEE 802.3 1000BASE-T and Category 5e cabling standards, and supports Ethernet plus CC-Link communication. It is suited to MELSEC programmable controller networks, CC-Link IE and CC-Link IE TSN installations, and other factory-automation equipment that needs a durable shielded Cat 5e cordset in an indoor enclosure or machinery environment.
Mitsubishi SC-E5EW-S35M-L Outdoor Shielded Cat 5e Ethernet Cable for CC-Link IE TSN 35 m
SKU: SC-E5EW-S35M-L
The Mitsubishi SC-E5EW-S35M-L (SC-E5EW-S35M-L) is a 35 m / 114 ft shielded Cat 5e Ethernet cable and cordset from the SC-E5EW series, designed for Ethernet and CC-Link communication in Mitsubishi Electric factory automation systems. It uses a double-shielded STP straight-cable construction with eight wires in four twisted pairs, aluminum/polyester tape plus tin-plated annealed copper wire braid shielding, and shielded straight RJ-45 connectors. The LAP-sheath version is intended for indoor and outdoor installation and has a finished outside diameter of approximately 10 mm. The cable is 1000BASE-T compliant and conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801, supporting reliable shielded network connections for MELSEC PLC and CC-Link IE TSN applications. It is equivalent to SCE5EWS35ML and is suitable for connecting outdoor field devices, control panels, and network equipment where a durable 35-meter Cat 5e cordset is required.
Mitsubishi SC-E5EW-S35M-MV Shielded Cat5e Ethernet Cable for CC-Link IE TSN, 35 m
SKU: SC-E5EW-S35M-MV
The Mitsubishi SC-E5EW-S35M-MV is a 35 m (114 ft) shielded Category 5e Ethernet cable in the SC-E5EW series, designed for indoor movable field-device connections in CC-Link IE TSN and CC-Link IE Field Network systems. It is a flexible, double-shielded STP straight cable with eight wires arranged as four twisted pairs. Its shielding combines aluminum/polyester tape with a tin-plated annealed copper wire braid to help suppress external noise and EMI in multi-cable installations. The cable is terminated with shielded RJ-45 straight connectors at both ends and has a flame-retardant PVC jacket with a finished outside diameter of 6.5 mm. It conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, supporting 1000BASE-T Ethernet communication. The 35 m length is intended for indoor movable applications, where the indoor movable -MV version of the SC-E5EW series offers lengths up to 45 m. Typical uses include wiring MELSEC programmable controller systems, remote I/O and other field devices on CC-Link IE networks, particularly in indoor movable areas of machinery.
Mitsubishi SC-E5EW-S3M CC-Link IE Field Ethernet Cable for MELSEC PLCs
SKU: SC-E5EW-S3M
The Mitsubishi SC-E5EW-S3M is a 3 m Category 5e double-shielded Ethernet cable from the SC-E5EW series, designed for CC-Link IE Field and 1000BASE-T networks in MELSEC PLC systems. It uses a straight Cat 5e or higher STP construction with eight wires arranged as four twisted pairs. The double shield combines aluminum/polyester tape with a tin-plated annealed copper wire braid, helping maintain signal integrity in electrically noisy control environments. The cable has a flame-retardant PVC jacket with a finished outside diameter of 6.8 mm and shielded straight RJ-45 connectors. It conforms to IEEE 802.3 1000BASE-T and ANSI/TIA/EIA-568-B Category 5e requirements and is intended for indoor installation. Typical uses include connecting Mitsubishi MELSEC programmable controllers, network modules and compatible field devices in CC-Link IE Field and Ethernet networks. Its 3 m length supports short indoor runs between control equipment and field devices.
Mitsubishi SC-E5EW-S3M-L Cat 5e Outdoor Shielded Ethernet Cable/Cordset for CC-Link IE TSN 3 m
SKU: SC-E5EW-S3M-L
The Mitsubishi SC-E5EW-S3M-L (SC-E5EW-S3M-L) is a Category 5e outdoor shielded Ethernet cable/cordset from the SC-E5EW series. It is designed for outdoor field devices and for Ethernet and CC-Link communication in Mitsubishi Electric MELSEC programmable controller and CC-Link IE TSN network installations. The assembly uses a Cat 5e or higher double-shielded STP straight cable with eight wires in four twisted pairs, aluminum/polyester tape and a tin-plated annealed copper wire braid for shielding. Its LAP sheath gives a finished outside diameter of 10 mm, and the 3 m / 9 ft cord is terminated with shielded RJ-45 straight connectors. The cable conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, and it is suitable for indoor/outdoor installation as the L version of the SC-E5EW series. Typical uses include connecting field devices, PLCs and network equipment in factory automation systems where a durable shielded Ethernet or CC-Link connection is required.
Mitsubishi SC-E5EW-S3M-MV Shielded Cat 5e Ethernet & CC-Link Cable, 3 m
SKU: SC-E5EW-S3M-MV
The Mitsubishi SC-E5EW-S3M-MV is a 3 m (9 ft) shielded Cat 5e Ethernet and CC-Link cable from the SC-E5EW series. It is a flexible, double-shielded STP straight cable intended for indoor movable field-device installations where cable movement and strong noise immunity are required. The cable contains eight wires arranged as four twisted pairs. Its double shield combines aluminum/polyester tape with a tin-plated annealed copper braid, helping suppress external noise and EMI when several cables are laid together. The flame-retardant PVC jacket has a finished outside diameter of 6.5 mm on this MV variant. Shielded RJ-45 connectors are wired straight for direct device connection. The cable conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, and supports Ethernet and CC-Link communication in CC-Link IE Field and TSN network environments. Typical applications include connecting indoor field devices, PLCs and other CC-Link IE equipment in machine and factory automation systems. It is equivalent to SCE5EWS3MMV.
Mitsubishi SC-E5EW-S40M Cat 5e Double-Shielded Ethernet Cable 40 m for CC-Link IE Field
SKU: SC-E5EW-S40M
The Mitsubishi SC-E5EW-S40M (SC-E5EW-S40M) is a 40 m (131 ft) Category 5e shielded Ethernet cable and cordset from the SC-E5EW series. It uses a double-shielded STP construction with aluminum/polyester tape and a tin-plated annealed copper wire braid around four twisted pairs, and it terminates in shielded RJ-45 straight connectors. The cable is intended for indoor field-device connections and supports Ethernet and CC-Link communication, including CC-Link IE Field and 1000BASE-T networks. Its flame-retardant PVC jacket has a finished outside diameter of 6.8 mm, and the assembly conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801. The double shield helps with EMI and external-noise measures, especially when cables are laid alongside other cables. Typical applications include Mitsubishi MELSEC programmable controller systems, control cabinets, and indoor connections between compatible field devices, switches, and network equipment. The part is equivalent to SCE5EWS40M.
Mitsubishi SC-E5EW-S45M Cat 5e Double-Shielded Ethernet Cable for CC-Link IE, 45 m
SKU: SC-E5EW-S45M
The Mitsubishi SC-E5EW-S45M (SC-E5EW-S45M) is a Category 5e double-shielded Ethernet cable from the SC-E5EW series, designed for indoor industrial networking of field devices. It supports Ethernet and CC-Link IE communication over a 45 m (147 ft) straight cable with eight wires arranged as four twisted pairs. The double shield combines aluminum/polyester tape with a tin-plated annealed copper wire braid, and the assembly uses shielded straight RJ-45 connectors. The cable is rated for 1000BASE-T and conforms to IEEE 802.3 1000BASE-T and ANSI/TIA/EIA-568-B Category 5e, with a flame-retardant PVC outer sheath and a finished outside diameter of 6.8 mm. It is intended for fixed indoor installation, such as connecting MELSEC programmable controllers and CC-Link IE field network equipment inside control cabinets or on machinery. The 45 m length supports panel-to-panel and machine-to-machine runs where a shielded twisted-pair connection is required. The SC-E5EW-S45M is equivalent to SCE5EWS45MMV.
Mitsubishi SC-E5EW-S50M Cat 5e Double-Shielded Ethernet Cable for CC-Link IE 50m
SKU: SC-E5EW-S50M
The Mitsubishi SC-E5EW-S50M is a 50 m (164 ft) Category 5e double-shielded Ethernet cable from the SC-E5EW series, intended for indoor field-device wiring in Mitsubishi Electric CC-Link IE and Ethernet networks. It is a straight STP cordset with eight wires arranged as four twisted pairs. The double shield combines aluminum/polyester tape with a tin-plated annealed copper braid for strong shielding performance, and the cable is terminated with shielded RJ-45 connectors in straight wiring. It is 1000BASE-T compliant and conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. The flame-retardant PVC sheath has a finished outside diameter of 6.8 mm. The 50 m length is suited to fixed indoor runs between field devices, switches and controllers, including MELSEC programmable controller systems and CC-Link IE networks. It is the equivalent of SCE5EWS50M. Use this shielded cordset for Ethernet and CC-Link communication in control cabinets and other indoor installations where reliable signal integrity is required.
Mitsubishi SC-E5EW-S50M-L Shielded Cat 5e Outdoor Ethernet Cable for CC-Link IE TSN 50 m
SKU: SC-E5EW-S50M-L
The Mitsubishi SC-E5EW-S50M-L is a shielded Category 5e Ethernet cable/cordset from the SC-E5EW series, designed for outdoor field devices and CC-Link IE TSN networks. It uses a double-shielded STP straight-cable construction with eight wires in four twisted pairs, combining aluminum/polyester tape with a tin-plated annealed copper wire braid. The LAP sheath gives the cable a finished outside diameter of 10 mm, and the assembly is fitted with shielded RJ-45 connectors in a straight connection. The cable is listed as compliant with IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801. Its 50 m / 164 ft length is suited to Ethernet and CC-Link communication runs between Mitsubishi MELSEC programmable controllers, CC-Link IE TSN equipment, and outdoor field devices where strong shielding is required. The SC-E5EW-S50M-L is equivalent to SCE5EWS50ML. The SC-E5EW series is available in lengths from 1 m to 100 m in 1 m increments, with the -L variant specified for indoor/outdoor installation.
Mitsubishi SC-E5EW-S5M Cat 5e Double-Shielded Ethernet Cable for CC-Link IE 5 m
SKU: SC-E5EW-S5M
The Mitsubishi SC-E5EW-S5M (SC-E5EW-S5M) is a 5 m (16 ft) Cat 5e double-shielded Ethernet cable from the SC-E5EW series, designed for indoor networking with Ethernet and CC-Link IE communication. It uses a straight Category 5e or higher cable construction with eight wires in four twisted pairs. The double shield consists of aluminum/polyester tape and a tin-plated annealed copper wire braid, and the cable terminates in shielded RJ-45 straight connectors. Its flame-retardant PVC jacket has a finished outside diameter of 6.8 mm. The cable conforms to IEEE 802.3 1000BASE-T and ANSI/TIA/EIA-568-B Category 5e, making it suitable for 1000BASE-T links in control cabinets and other indoor areas. Typical applications include connecting MELSEC programmable controllers, CC-Link IE TSN network devices, and other Ethernet equipment in factory automation systems. The 5 m length supports flexible routing between PLCs, network modules, and field devices inside a control panel or other indoor installation.
Mitsubishi SC-E5EW-S5M-L Cat 5e Outdoor Shielded Ethernet Cable for CC-Link IE TSN and CC-Link IE Field Networks
SKU: SC-E5EW-S5M-L
The Mitsubishi SC-E5EW-S5M-L (SC-E5EW-S5M-L) is a 5 m Category 5e outdoor shielded Ethernet cable from the SC-E5EW series, supplied as a cordset with shielded RJ-45 connectors. It is designed for 1000BASE-T networks and for CC-Link IE TSN and CC-Link IE Field communication in Mitsubishi Electric MELSEC programmable controller systems. The cable uses four twisted pairs (eight wires) with double shielding, aluminum/polyester tape plus tin-plated annealed copper braid, to help resist external noise and EMI in multi-cable installations. Its indoor/outdoor LAP sheath has a finished outside diameter of 10 mm, and the straight RJ-45 connection supports shielded termination. The assembly conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, making it suitable for control cabinets, industrial Ethernet links, and field-device connections that require a durable shielded cordset. The 5 m length provides flexible routing between network devices while maintaining Category 5e performance.
Mitsubishi SC-E5EW-S5M-MV Cat 5e Double-Shielded Ethernet Cable for CC-Link IE TSN 5 m
SKU: SC-E5EW-S5M-MV
The Mitsubishi SC-E5EW-S5M-MV is a flexible Category 5e shielded Ethernet cable and cordset for indoor field-device connections. It is part of the SC-E5EW series, designed for 1000BASE-T networks and for use with MELSEC programmable controllers and CC-Link IE TSN communication. The cable has eight wires arranged as four twisted pairs, a double shield made of aluminum/polyester tape and tin-plated annealed copper braid, and shielded straight RJ-45 connectors. Its 5 m (16 ft) length and indoor-movable construction suit connections to moving equipment and field devices, while the flame-retardant PVC sheath has a finished outside diameter of 6.5 mm. The cable conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. It is intended for reliable Ethernet communication in control systems and is equivalent to SCE5EWS5MMV.
Mitsubishi SC-E5EW-S70M Indoor CC-Link IE Field Cat.5e Ethernet Cable 70 m
SKU: SC-E5EW-S70M
The Mitsubishi SC-E5EW-S70M is a 70 m indoor CC-Link IE Field Cat.5e Ethernet cable/cordset from the SC-E5EW series. It has shielded RJ-45 connectors on both ends and is intended for Ethernet and CC-Link communication in Mitsubishi Electric MELSEC programmable controller networks. The cable is Category 5e or higher, double-shielded/STP straight cable with eight wires arranged as four twisted pairs. Its double shield uses aluminum/polyester tape and tin-plated annealed copper braid, helping maintain reliable network communication in electrically noisy environments. The flame-retardant PVC jacket has a finished outside diameter of 6.8 mm, and the assembly is designed for indoor installation. It is 1000BASE-T compliant and conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e, and ISO/IEC 11801. The 70 m length is equivalent to SCE5EWS70M. Typical uses include connecting compatible CC-Link IE Field devices, remote I/O, and MELSEC control systems in indoor panels and machine networks where a longer shielded Cat.5e cordset is required.
Mitsubishi SC-E5EW-S8M Cat 5e Double-Shielded Ethernet Cable for CC-Link IE TSN
SKU: SC-E5EW-S8M
The Mitsubishi SC-E5EW-S8M is an 8 m (26 ft) Category 5e Ethernet cable from the SC-E5EW series, designed for indoor field-device wiring in CC-Link IE TSN and Ethernet networks. It is a straight, double-shielded STP cordset with eight core wires in four twisted pairs; the shield combines aluminum/polyester tape with a tin-plated annealed copper braid, which gives the cable strong noise immunity in electrically noisy control cabinets. Both ends are terminated with shielded RJ-45 connectors in straight wiring. The cable meets IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, and its flame-retardant PVC sheath has a finished outside diameter of 6.8 mm. The 8 m length belongs to the standard indoor fixed-installation range, which the series offers from 1 m to 100 m in 1 m steps, while the movable indoor variant tops out at 45 m. It is typically used to link MELSEC programmable controllers, CC-Link IE TSN master and remote stations, and other Ethernet-enabled factory automation devices. The equivalent Mitsubishi order code is SCE5EWS8M.
Mitsubishi SC-E5EW-S9M Shielded Category 5e Ethernet Cable for CC-Link IE TSN, 9 m
SKU: SC-E5EW-S9M
The Mitsubishi SC-E5EW-S9M is a 9 m shielded Category 5e Ethernet cable from the SC-E5EW series, designed for CC-Link IE TSN and CC-Link IE Field network communication. It is a 1000BASE-T-compliant straight cable with eight wires arranged as four twisted pairs. The double shield consists of aluminum/polyester tape and a tin-plated annealed copper braid, helping protect signals from EMI and external noise in factory automation environments. The cable has shielded RJ-45 connectors in a straight connection and a flame-retardant PVC jacket with a finished outside diameter of 6.8 mm. This indoor fixed-installation version is suitable for wiring inside control cabinets and for connecting MELSEC programmable controllers, network modules and other CC-Link IE TSN or CC-Link IE Field devices. It conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. The SC-E5EW series is available in lengths from 1 m to 100 m in 1 m increments, and this 9 m version suits equipment and control-panel layouts that require a defined cable run. It is certified by the CC-Link Partner Association for reliable industrial Ethernet networking.
Mitsubishi SC-E5EW-SX15M CC-Link IE Field Ethernet Cordset for MELSEC PLCs 15 m
SKU: SC-E5EW-SX15M
The Mitsubishi SC-E5EW-SX15M is a CC-Link IE Field indoor Ethernet cable assembly from the SC-E5EW series, supplied as a 15 m (49 ft) cordset with an RJ45 connector and an X-coded connector. It is equivalent to SCE5EWSX15M and is intended for PLC and network connections in Mitsubishi MELSEC control systems. The cable is a Category 5e or higher, double-shielded STP straight cable with eight wires arranged as four twisted pairs. Its shielding uses aluminum/polyester tape and tin-plated annealed copper wire braid, which helps maintain signal integrity and limit external noise in control cabinets and factory networks. The assembly is compliant with IEEE 802.3 1000BASE-T and ANSI/TIA/EIA-568-B Category 5e, and the SC-E5EW indoor cable uses a flame-retardant PVC sheath. The shielded straight RJ45 connector and X-coded connector make it suitable for CC-Link IE Field links between MELSEC PLCs, I/O equipment, and other networked devices in indoor installations. It is intended for 15 m Ethernet connections in indoor control systems.
Mitsubishi SC-E5EW-SX20M CC-Link IE Field Indoor Ethernet Cable 20 m for MELSEC PLCs
SKU: SC-E5EW-SX20M
The Mitsubishi SC-E5EW-SX20M (SC-E5EW-SX20M) is a CC-Link IE Field indoor Ethernet cable/cordset in the SC-E5EW series, supplied as a 20 m (65 ft) assembly with an RJ45 connector and an X-coded connector. It is designed for MELSEC programmable logic controller systems, including the MELSEC iQ-R, iQ-F, Q, L and F ranges, and for network-related products that use IE Field or 1000BASE-T Ethernet connections. The cable is a Category 5e or higher, double-shielded STP straight cable with eight wires arranged as four twisted pairs. Its shielding combines aluminum/polyester tape with a tin-plated annealed copper braid, and the flame-retardant PVC sheath has a finished outside diameter of 6.8 mm. The assembly is intended for indoor installation and is equivalent to part number SCE5EWSX20M. Typical uses include connecting MELSEC controllers and compatible network products inside control cabinets and other indoor equipment, where a fixed 20 m cordset with RJ45 and X-coded interfaces is required.