Componenti per automazione industriale
Sfoglia ricambi CNC e per automazione industriale con consegna mondiale.
Cerca prodotti
Categorie
Mitsubishi SC-PWC4CBL5M-ML General-Purpose AC Servo Power Cable for MELSERVO MR-J4/J3/JN 5 m
SKU: SC-PWC4CBL5M-ML
The Mitsubishi SC-PWC4CBL5M-ML is a 5 m general-purpose AC servo power cable for Mitsubishi MELSERVO MR-J4, MR-J3, and MR-JN servo systems. It connects the servo amplifier to the servo motor and carries the motor power feed in fixed-installation sections of machines and equipment. The ML variant is the fine-wire standard version intended for fixed-part use, making it suitable for stationary cable runs rather than continuous flexing. Its wire is UL 758 AWM, rated for 105°C and 600 V, and the cable is EU RoHS compliant and produced under the UL wiring harness traceability program. The 5 m length supports typical servo-axis layouts in machine frames and fixed equipment. Typical applications include power wiring for MR-J4, MR-J3, and MR-JN servo axes where a standard fixed-run servo power cable is required.
Mitsubishi SC-PWC4CBL6M-SBH High-Flex Servomotor Power Cable 6m for MELSERVO MR-J4/JN
SKU: SC-PWC4CBL6M-SBH
The Mitsubishi SC-PWC4CBL6M-SBH is a 6 m high-flex-life servomotor power cable designed for direct connection between a servo amplifier and a servo motor. It is supplied with a servo amplifier connector and a servo motor connector, simplifying installation in MELSERVO MR-J4/JN drive systems and compatible HG-JR series motors. The cable uses AWG15 conductors, a shielded construction, and straight connectors rated IP67, supporting reliable power transmission in moving machine axes. Its high-flex design suits continuous flexing in cable carriers and other demanding motion applications, while the shield helps limit switching noise from the power cable. The 6 m length provides layout flexibility between the control cabinet and the machine frame. Typical applications include automated machinery, robotic cells, CNC axes, and other motion systems that use Mitsubishi AC servo drives. The assembly is intended for direct servo motor connection where a factory-terminated power cable is required.
Mitsubishi SC-PWC4CBL7M-ML Servo Motor Power Cable for MELSERVO J4/J3/JN
SKU: SC-PWC4CBL7M-ML
The Mitsubishi SC-PWC4CBL7M-ML is a 7 m servo motor power cable and cordset designed for direct connection between a Mitsubishi servo amplifier and servo motor. It is supplied as a complete connectorized assembly with a servo amplifier connector and a servo motor connector, simplifying wiring and reducing installation time. The ML designation identifies a fine-wire, standard-duty cable intended for fixed-part installations rather than continuous flexing. The cable is part of the Mitsubishi general-purpose AC servo power cable range used with MELSERVO J4, J3, and JN series servo systems. Its wire section uses UL AWM construction (UL 758), with the ML fine-wire version listed under UL style 2586 at 105°C and 600V, and the assembly is RoHS compliant. The 7 m length suits machine layouts where the amplifier and motor are separated by a moderate distance. Typical applications include power transmission from the servo amplifier to the servo motor in fixed wiring of MELSERVO-based machine tools, packaging equipment, and other automated machinery. The cable carries motor power only; feedback and brake connections require separate cables where applicable.
Mitsubishi SC-PWC4CBL8M-ML Servo Power Cable for MELSERVO MR-J4/J3/JN, 8 m
SKU: SC-PWC4CBL8M-ML
The Mitsubishi SC-PWC4CBL8M-ML is an 8-meter general-purpose AC servo power cable supplied with connectors for the servo amplifier and servo motor. It is designed for Mitsubishi MELSERVO MR-J4, MR-J3 and JN servo systems, where it carries motor power between the drive and the motor in a fixed installation. The ML suffix identifies the standard cable for fixed parts, not the high-flex variant. The cable uses thin wire construction and is assembled as a UL wiring harness with traceability. Its specification states that the product does not contain the RoHS-restricted substances lead, mercury, cadmium, hexavalent chromium, PBB or PBDE. The straight connectors simplify replacement and wiring in control cabinets and machine frames. Typical applications include connecting Mitsubishi AC servo amplifiers to their matching servo motors in packaging, assembly, handling and other fixed machine axes. The 8 m length gives installers extra routing freedom while keeping the amplifier-to-motor connection neat and serviceable.
Mitsubishi SC-PWC4JCBL10M-H High-Flex Servomotor Power Cable for MELSERVO MR-J4/JN
SKU: SC-PWC4JCBL10M-H
The Mitsubishi SC-PWC4JCBL10M-H is a 10 m high-flex servomotor power cable set for Mitsubishi MELSERVO MR-J4/JN servo systems. It is configured for a servomotor junction connection and is supplied with a servo amplifier connector and a servo motor connector, allowing the power path to be terminated at both ends of the cable. The high-flex construction is intended for applications with repeated bending, where a standard fixed-installation power cable would be less suitable. Its 10 m length gives installers additional reach between the amplifier and motor while keeping a connectorized, replaceable cable assembly. Typical uses include servo-driven positioning axes, automated machinery, production equipment and other motion-control installations that require a durable amplifier-to-motor power connection. When selecting the cable, confirm the applicable MELSERVO motor, connector orientation and required length against the machine configuration.
Mitsubishi SC-PWC4JCBL2M-A1LL Servomotor Power Cable Set for MR-J4/JN Drives
SKU: SC-PWC4JCBL2M-A1LL
The Mitsubishi SC-PWC4JCBL2M-A1LL is a 2 m servomotor power cable set designed for Mitsubishi MELSERVO MR-J4/JN servo drive systems. It is a thick-wire LL type with a load-side cable outlet (A1) and comes factory-fitted with a servo amplifier connector and a servomotor connector, allowing the drive and motor to be connected as a complete junction cable. The cable is intended for standard fixed installations and uses the thicker LL conductor construction for the power connection between the servo amplifier and motor. Its 2 m length provides a defined reach for compact machine wiring. Typical applications include connecting Mitsubishi AC servo motors and drives in packaging, assembly, positioning, and general motion-control equipment. The part is identified by model and order number SC-PWC4JCBL2M-A1LL. Check the servo drive series, motor rating, cable length, outlet direction, and connector configuration before ordering.
Mitsubishi SC-PWC4JCBL4M-SBH High-Flex Servo Power Cable 4 m for MELSERVO MR-J4/J3
SKU: SC-PWC4JCBL4M-SBH
The Mitsubishi SC-PWC4JCBL4M-SBH is a 4-meter high-flex servo power cable assembly for the junction connection between a Mitsubishi servo amplifier and servomotor. It is supplied with a servo amplifier connector and a servomotor connector, allowing the motor power path to be installed as a complete cordset rather than assembled on site. The cable is designed for ultra-high bending endurance and long bending life, making it suitable for applications that require repeated flexing. It belongs to the SC-PWC4J power cable family and is intended for Mitsubishi general-purpose AC servo systems, including MELSERVO MR-J4 and MR-J3 series applications where a motor-side junction cable is required. The 4 m length provides reach between the servo amplifier and motor while retaining a configured connector interface. Typical use is in servo-driven machinery and automated equipment that requires a durable, replaceable power connection. Verify the applicable servo motor and connector orientation against Mitsubishi documentation before installation.
Mitsubishi SC-PWC4JCBL5M-A2-L Servo Motor Power Cable for Junction Connection 5 m
SKU: SC-PWC4JCBL5M-A2-L
The Mitsubishi SC-PWC4JCBL5M-A2-L is a 5-meter servo motor power cable/cordset for junction connection, supplied with a servo amplifier connector and a servo motor connector. It is used to carry servo motor power in Mitsubishi MELSERVO servo systems where a relay or junction connection is required rather than a direct amplifier-to-motor cable. The A2 configuration provides a motor-side cable exit on the side opposite the load, and the -L suffix identifies the standard bending-life version. The cable belongs to Mitsubishi's SC-PWC4 power cable family, which is documented for general-purpose AC servo applications, including MELSERVO MR-J3 and MR-J4 systems. Its 5 m length helps with routing in machine cells, control cabinets, and servo-driven positioning axes, while the pre-terminated amplifier and motor connectors simplify replacement and installation. Confirm the amplifier model, motor series, and connector orientation against the existing cable before ordering, as cable length and exit direction are application-specific.
Mitsubishi SC-PWC4JCBL5M-A4-L Servo Motor Power Cable for MR-J4/JN Series
SKU: SC-PWC4JCBL5M-A4-L
The Mitsubishi SC-PWC4JCBL5M-A4-L is a 5 m servo motor power cable and cordset for Mitsubishi MELSERVO MR-J4/JN servo systems. It is intended for servo motor junction connections and is supplied with a servo amplifier connector and a servo motor connector, allowing the amplifier and motor to be linked through the cable. The A4 designation corresponds to a right-side shaft cable exit. Its 5 m length provides a defined cable run for compatible servo axes in MR-J4/JN installations. Supported motor combinations include HG-SR121, HG-SR201, HG-SR202(4), HG-SR301, HG-SR352(4), HG-SR502(4), HG-JR353 and HG-JR503. The cable is suited to motion-control installations where a connectorized power cable is required between a Mitsubishi servo amplifier and servo motor, such as machine tools, production machinery and automated equipment using Mitsubishi AC servo drives. It belongs to the MELSERVO cable selection and should be matched to the amplifier, motor and required routing direction when ordering.
Mitsubishi SC-PWC4JCBL6M-SBH 6 m High-Flex Servo Power Cable for MELSERVO MR-J4/J3
SKU: SC-PWC4JCBL6M-SBH
The Mitsubishi SC-PWC4JCBL6M-SBH (SC-PWC4JCBL6M-SBH) is a 6-meter high-flexibility servo power cable assembly for Mitsubishi MELSERVO MR-J4 and MR-J3 AC servo systems. It connects a servo amplifier to a servomotor using factory-fitted connectors at both ends, simplifying replacement and reducing wiring time. The cable belongs to Mitsubishi's high-flex-life power cable series and is intended for applications where continuous motion and repeated bending place extra demand on the cable. Its shielded construction helps suppress switching noise radiated from the power cable, making it suitable for EMC-sensitive installations. The assembly uses AWG15 conductors, straight connectors, and an IP67 protection rating for the connector area. It is designed for medium-capacity servomotors and can be used in machine tools, packaging equipment, material handling systems, and other motion-control applications that use MELSERVO MR-J4 or MR-J3 drives. The 6 m length provides flexibility when routing between cabinets and moving machine sections. Verify the required connector orientation and motor rating against the machine documentation before installation.
Mitsubishi SC-PWC5CBL10M-H High-Flex 10 m Servo Power Cable for MR-J3 and HG-SR/HG-JR
SKU: SC-PWC5CBL10M-H
The Mitsubishi SC-PWC5CBL10M-H (SC-PWC5CBL10M-H) is a 10 m high-flex servo power cable assembly for direct connection between a Mitsubishi servo amplifier and servo motor. It is supplied with a servo amplifier connector and a servo motor connector, allowing the motor to be connected without separate terminal wiring. The cable is designed for high bending life and is suitable for moving axes and other applications where the cable is subjected to repeated flexing. It is compatible with HG-SR and HG-JR series servo motors rated at 1.2 kW, 2 kW, 3 kW and 5 kW, and with MR-J3 series servo amplifiers. The 10 m length supports installations where the amplifier and motor are separated by a longer distance. Typical uses include industrial robot axes, machine tool feed axes, packaging machinery, handling equipment and other motion-control systems that use Mitsubishi MELSERVO equipment. The cable is part of Mitsubishi's high-flex servo cable range and is intended for power transmission between drive and motor, not for encoder or brake signals. The product is listed as compliant with the EU RoHS directive and is covered by the UL wiring harness program according to the manufacturer's standard specification. It is a direct-connection cordset, so the correct connector style and motor rating should be checked before installation.
Mitsubishi SC-PWC5CBL10M-L 10 m Servo Power Cable for MR-J3 Drives & HG-SR/HG-JR Motors
SKU: SC-PWC5CBL10M-L
The Mitsubishi SC-PWC5CBL10M-L (SC-PWC5CBL10M-L) is a 10 m servo power cable or cordset designed for direct connection between a servo amplifier and a servo motor. It is fitted with a servo amplifier connector and a servo motor connector and is listed as a C5 standard straight cable with IP67 protection. The cable is compatible with MELSERVO MR-J3 series amplifiers and with HG-SR and HG-JR series servo motors rated at 1.2 kW, 2 kW, 3 kW, and 5 kW. Its 10 m length supports direct drive-to-motor wiring in MELSERVO MR-J3 servo systems. Typical applications include connecting the amplifier output to the motor power terminals on HG-SR and HG-JR servomotors in machinery that uses the MR-J3 platform. The part is identified by manufacturer reference SC-PWC5CBL10M-L and is listed by Mitsubishi Electric as a commercialized product. Select it for compatible MR-J3, HG-SR, and HG-JR combinations, verifying the connector type and motor rating before installation.
Mitsubishi SC-PWC5CBL15M-ML 15 m Servo Motor Power Cable for MR-J3 Drives & HG-SR/HG-JR Motors
SKU: SC-PWC5CBL15M-ML
The Mitsubishi SC-PWC5CBL15M-ML is a 15-meter servo motor power cable and cordset for direct connection between a Mitsubishi servo amplifier and servo motor. It is supplied with a servo amplifier connector and a servo motor connector, allowing a complete plug-in power link without separate field termination. The cable uses thin-wire, standard-duty construction; the ML suffix identifies the standard fixed-installation version in the SC-PWC5CBL range. This cordset is compatible with MR-J3 series servo amplifiers and with HG-SR and HG-JR series servo motors rated at 1.2 kW, 2 kW, 3 kW and 5 kW. The 15 m length supports installations where the drive cabinet and motor are separated, while the connectorized ends simplify replacement and commissioning. It is suitable for servo-axis wiring in machine tools, packaging machinery, material handling equipment and other automated systems that use these Mitsubishi servo combinations.
Mitsubishi SC-PWC5CBL1M-L 1 m Servo Motor Power Cable for MELSERVO MR-J3 Series
SKU: SC-PWC5CBL1M-L
The Mitsubishi SC-PWC5CBL1M-L (SC-PWC5CBL1M-L) is a 1 m servo motor power cable/cordset designed for direct connection between a Mitsubishi servo amplifier and servo motor. It belongs to the SC-PWC5CBL power cable family, which uses servo amplifier and servo motor connectors and is intended for power transmission in MELSERVO motion control systems. Catalog information for the series lists compatibility with MELSERVO MR-J3 series amplifiers and HG-SR and HG-JR series servo motors in 1.2 kW, 2 kW, 3 kW, and 5 kW ratings. The direct-connection cable type is available in different lengths to suit machine layouts; the part number identifies the specific length and termination variant, so the existing cable and connector arrangement should be checked before replacement. Typical applications are servo axes in compact machines, assembly equipment, positioning systems, and other Mitsubishi motion control installations where a factory-made amplifier-to-motor power cable is required. The cable is supplied as a single replacement part and should be installed according to Mitsubishi's wiring and compatibility guidelines for the specific amplifier and motor combination.
Mitsubishi SC-PWC5CBL20M-ML Servo Motor Power Cable for MR-J3 Amplifiers 20 m
SKU: SC-PWC5CBL20M-ML
The Mitsubishi SC-PWC5CBL20M-ML is a 20-meter power cable and connector set for direct connection between a Mitsubishi MELSERVO servo amplifier and servo motor. It is fitted with a servo amplifier connector and a servo motor connector, allowing the drive and motor to be linked without separate field wiring. The cable uses thin-profile conductors, and the ML designation identifies a standard cable intended for fixed-part installations. It is compatible with Mitsubishi MR-J3 series servo amplifiers and with HG-SR and HG-JR series servo motors in the 1.2 kW, 2 kW, 3 kW, and 5 kW classes. The 20 m length supports installations where the amplifier cabinet and motor are separated by a longer cable run, such as machine tools, packaging equipment, material handling systems, and other automated machinery using MELSERVO motion control. The assembly is used to transmit servo motor power, and its pre-assembled connectors simplify replacement and reduce installation time. Verify the amplifier series, motor model, and required cable length against the machine documentation before ordering.
Mitsubishi SC-PWC5CBL25M-ML Servo Power Cable for HG-SR/HG-JR Motors and MR-J3 Amplifiers
SKU: SC-PWC5CBL25M-ML
The Mitsubishi SC-PWC5CBL25M-ML is a 25-meter servo power cable and cordset for direct connection between a servo amplifier and servo motor. It uses the ML fine-wire, standard fixed-installation construction and is supplied with a servo amplifier connector and a servo motor connector. The cable is compatible with Mitsubishi HG-SR and HG-JR series servomotors in 1.2 kW, 2 kW, 3 kW and 5 kW ratings when used with MR-J3 series amplifiers. Its wire construction is rated to UL AWM standards at 105°C and 600 V, and the product is manufactured under the UL wiring harness program and complies with the EU RoHS Directive. Typical applications are fixed wiring in control cabinets and machine frames where a ready-made direct-connection servo power lead reduces installation time. The 25 m length supports layouts that require extra reach between the drive and motor.
Mitsubishi SC-PWC5CBL27M-A2-L 27 m Servo Motor Power Cable with Connectors for MR-J3 Amplifiers and HG-SR/HG-JR Motors
SKU: SC-PWC5CBL27M-A2-L
The Mitsubishi SC-PWC5CBL27M-A2-L is a 27-meter servo motor power cable and cordset for direct connection, configured with the lead opposite the load side and a lead-out cable exit. It is supplied with a servo amplifier connector and a servo motor connector, so the cable can link compatible Mitsubishi Electric servo amplifiers and motors as a complete connection assembly. The cable is intended for HG-SR and HG-JR series servo motors rated at 1.2 kW, 2 kW, 3 kW, or 5 kW and for MR-J3 series servo amplifiers. The 27 m length is suitable where the motor and amplifier are installed farther apart, and the connectorized construction supports direct connection in the drive-to-motor circuit. Typical applications include servo-driven machine axes, positioning equipment, and other motion-control installations using compatible MR-J3, HG-SR, or HG-JR hardware. The product is identified by the manufacturer order code SC-PWC5CBL27M-A2-L.
Mitsubishi SC-PWC5CBL30M-H High-Flex Servo Motor Power Cable 30 m for HG-SR/HG-JR Motors & MR-J3 Amplifiers
SKU: SC-PWC5CBL30M-H
The Mitsubishi SC-PWC5CBL30M-H is a 30 m high-flexibility servo motor power cable designed for direct connection between a servo amplifier and a servo motor. It is supplied as a cordset with a servo amplifier connector and a servo motor connector, allowing straightforward wiring in motion-control cabinets and on moving machine structures. Its high bending-life construction is intended for applications where the cable is subjected to repeated flexing. Product data lists compatibility with Mitsubishi HG-SR and HG-JR series 1.2 kW, 2 kW, 3 kW, and 5 kW servo motors and with MR-J3 series amplifiers. The 30 m length supports installations where the drive and motor are separated by a longer run, while the connectorized ends are configured for direct connection. Typical applications include servo-driven axes on packaging machinery, material handling equipment, machine tools, and other automated machinery. Before installation, verify the connector orientation, required bending radius, and amplifier/motor combination against Mitsubishi wiring documentation.
Mitsubishi SC-PWC5CBL6M-A2-L Servo Motor Power Cable for HG-SR/HG-JR and MR-J3
SKU: SC-PWC5CBL6M-A2-L
The Mitsubishi SC-PWC5CBL6M-A2-L is a 6-meter servo motor power cable / cordset designed for direct connection between a servo amplifier and a servo motor. It is supplied with a servo amplifier connector and a servo motor connector, allowing the motor to be wired as a complete pre-terminated power assembly rather than as separate cable and loose connectors. The cable is compatible with Mitsubishi HG-SR and HG-JR series motors rated 1.2 kW, 2 kW, 3 kW, and 5 kW, and with MR-J3 series servo amplifiers. Its cable exit is arranged on the load-opposite side. The 6-meter length supports routing between the drive cabinet and the motor in typical servo-driven machinery, including machine tools, packaging equipment, material handling systems, and other motion control installations that use HG-SR, HG-JR, or MR-J3 hardware.
Mitsubishi SC-PWC5CBL8M-A2-L 8 m Servo Motor Power Cable for MR-J3 Amplifiers and HG-SR/HG-JR Motors
SKU: SC-PWC5CBL8M-A2-L
The Mitsubishi SC-PWC5CBL8M-A2-L (SC-PWC5CBL8M-A2-L) is an 8-meter servo motor power cable designed for direct connection between a Mitsubishi servo amplifier and servo motor. The A2 configuration routes the cable exit opposite the load side, and the cable terminates with both a servo amplifier connector and a servo motor connector for plug-in wiring. It is compatible with Mitsubishi HG-SR and HG-JR series servo motors rated 1.2 kW, 2 kW, 3 kW, and 5 kW, and with MR-J3 series servo amplifiers. Its -L suffix denotes standard bending life, making it suitable for fixed-part installations where a long flex-life cable is not required. The 8 m length helps when the amplifier and motor are separated by a moderate distance in a machine cabinet or equipment frame, while the connectorized ends reduce field wiring time. Typical applications include direct servo-axis wiring in automated machinery where an MR-J3 series amplifier drives an HG-SR or HG-JR motor. The part is supplied as a complete power cable/cordset for direct servo motor connection.
Mitsubishi SC-PWC5JCBL10M-A1H High-Flex Servo Power Cable for MELSERVO 10 m
SKU: SC-PWC5JCBL10M-A1H
The Mitsubishi SC-PWC5JCBL10M-A1H is a 10 m high-flex servo power cable set intended for the load-side junction connection of a servomotor. It combines a power cable with a servo amplifier connector and a servomotor connector, so the assembly provides the power link between the drive and the motor in Mitsubishi AC servo systems. The cable is designed for high flex resistance and a long flex life, making it suitable for moving axes and cable-carrier installations where repeated bending occurs. Its 10 m length supports layouts that require extra reach between the servo amplifier and the motor while keeping the connection points terminated and ready for installation. The part is used in Mitsubishi servo-driven machinery, including MELSERVO-based motion-control arrangements, and is suited to packaging, handling, assembly, and other automated equipment with continuous or repetitive movement. It is a power cable rather than an encoder or brake cable, and it should be matched to the applicable servo amplifier and motor connector configuration. The model and order number are the same: SC-PWC5JCBL10M-A1H. No supply voltage, protection rating, conductor size, or net weight is stated in the available product data, so those details should be confirmed against the machine documentation before ordering.
Mitsubishi SC-PWC5JCBL5M-A1-H High-Flex Servo Motor Power Cable 5 m for MELSERVO
SKU: SC-PWC5JCBL5M-A1-H
The Mitsubishi SC-PWC5JCBL5M-A1-H (SC-PWC5JCBL5M-A1-H) is a 5 m high-flex servo motor power cable for Mitsubishi MELSERVO general-purpose AC servo systems. It is a motor-side relay power cable with a load-side cable exit, intended for the junction connection in the servo motor power path. The high-flex design supports repeated bending in moving machine sections, making it suitable for robot arms, positioning axes, and other dynamic servo applications. The cable is configured with an A1 lead-out and a 5 m length. Mitsubishi documentation for the SC-PWC5J power cable family notes EU RoHS compliance and application of the UL wiring harness program, and the relay cable is selected together with the matching amplifier-side cable. The current product data also specifies servo amplifier and servo motor connectors. For correct selection, verify the amplifier and motor models, connector arrangement, and required cable length against the machine's servo configuration.
Mitsubishi SC-PWS1CBL10M-A1-H High-Flex Servo Motor Power Cable 10 m for MELSERVO HF/HG Series
SKU: SC-PWS1CBL10M-A1-H
The Mitsubishi SC-PWS1CBL10M-A1-H is a high-flex servo motor power cable designed for direct connection between a Mitsubishi servo motor and its drive. It is a 10 m load-side lead-out cable with a servo motor connector and high bending endurance for long bending life, making it suitable for moving axes where continuous flexing occurs. When mated to compatible equipment, the connector area provides IP65 protection. The A1 suffix denotes the load-side lead-out version, while H indicates the high-flex, long-life construction. The cable is used with Mitsubishi MELSERVO HF-KN, HF-KP and HF-MP series servo motors and HG-KR and HG-MR series motors, and it is also specified for MM-GKR series sensorless servo motors where the same power cable is used. Its function is to carry servo motor power, supporting reliable operation in machine tools, packaging machinery, material handling equipment, robotics and other motion-control systems that require a durable, long-length motor cable. Install it according to Mitsubishi wiring and bending recommendations for the specific motor and drive combination.
Mitsubishi SC-PWS1CBL6M-A1-L Servo Motor Power Cable for HG/HF Series
SKU: SC-PWS1CBL6M-A1-L
The Mitsubishi SC-PWS1CBL6M-A1-L (SC-PWS1CBL6M-A1-L) is a 6-meter servo motor power cable for direct junction connection between a Mitsubishi servo amplifier and a servo motor. It is a load-side lead type with a servo amplifier connector and a servo motor connector, and it uses an angle connector design for routing in compact machine enclosures. The cable has IP65 protection and is intended for standard fixed-part installation; the L designation denotes the standard cable, while H versions are available for high-bending applications. It is compatible with HG-KR, HG-MR, HF-KN, HF-KP and HF-MP series servo motors and is used in MELSERVO servo systems and other motion-control installations where the amplifier and motor are separated by a 6-meter run. The cordset simplifies wiring, reduces field termination work and supports reliable servo power transmission. Confirm the required cable length and connector orientation against the machine layout before installation.
Mitsubishi SC-PWS1CBL6M-A2-L 6 m Servo Motor Power Cable for HG-KR/HG-MR/HF-KN/HF-KP/HF-MP
SKU: SC-PWS1CBL6M-A2-L
The Mitsubishi SC-PWS1CBL6M-A2-L is a 6 m direct-connection power cable set for MELSERVO servo motors, supplied with an amplifier-side connector and a motor-side connector. Its A2 designation routes the cable outlet on the side opposite the load, and the L suffix identifies the standard cable for fixed-part installation. The SC-PWS1CBL series is available in lengths from 1 to 10 m in 1 m increments and provides IP65 protection. It is compatible with HG-KR, HG-MR, HF-KN, HF-KP and HF-MP series servo motors, and the same power cable can also be used with MM-GKR series sensorless servo motors. The cable is used to connect the servo amplifier output to the motor in MELSERVO and MM-GKR motion-control systems. When position control is required, Mitsubishi documentation cites a maximum cable length of 5 m, so this 6 m version should be applied where that limit does not apply.
Mitsubishi SC-PWS1CBL7M-A1-H 7 m High-Flex Servo Motor Power Cable for MELSERVO
SKU: SC-PWS1CBL7M-A1-H
The Mitsubishi SC-PWS1CBL7M-A1-H is a 7 m high-flex servo motor power cable designed for direct connection in MELSERVO servo systems. Its H designation identifies the high bending endurance version, making it suitable for applications where the cable is subjected to repeated flexing and long bending life is required. The cable has an IP65 protection rating and a load-side lead-out configuration. It is compatible with Mitsubishi Electric HG-KR, HG-MR, HF-KN, HF-KP and HF-MP series servo motors, and the same cable family is used with MM-GKR series sensorless servo motors. The SC-PWS1CBL7M-A1-H provides a complete 7-meter connection for servo motor power wiring and is equivalent to MR-PWS1CBL7M-A1-H. Typical uses include servo-driven machinery, positioning equipment, packaging machines and other applications requiring a durable, protected motor power connection. Install only with compatible Mitsubishi servo systems and verify the required connector arrangement and cable routing for the specific motor and drive configuration.
Mitsubishi SC-PWS1CBL8M-A1-H High-Flex Servo Motor Power Cable for HF-KP/HF-KN/HF-MP/HG-KR Series
SKU: SC-PWS1CBL8M-A1-H
The Mitsubishi SC-PWS1CBL8M-A1-H (SC-PWS1CBL8M-A1-H) is an 8-meter high-flex servo motor power cable/cordset for direct connection between a Mitsubishi servo amplifier and motor. It has a load-side lead-out and high bending endurance for long flex life, making it suitable for moving axes, cable carriers, and other applications with repeated motion. The cable offers IP65 protection and is factory-terminated for direct motor connection. It is compatible with HF-KP, HF-KN, HF-MP, HG-KR, and HG-MR series servo motors and corresponds to the MR-PWS1CBL8M-A1-H cable. It is also used with MM-GKR series sensorless servo motors. Typical applications include industrial robots, CNC machines, packaging equipment, and other servo-driven systems requiring a durable 8 m motor power connection. The high-flex construction helps maintain reliable power transmission in continuous flexing installations. Verify connector orientation and cable length against the servo amplifier and motor configuration before installation.
Mitsubishi SC-PWS1CBL8M-A1-L Direct-Connection Servo Motor Power Cable for HF-KN/HF-KP/HF-MP/HG-KR/HG-MR 8 m
SKU: SC-PWS1CBL8M-A1-L
The Mitsubishi SC-PWS1CBL8M-A1-L is an 8 m servo motor power cable for direct-connection wiring in Mitsubishi servo systems. It is a load-side lead-out cable (A1) with the standard L construction, intended for fixed-part installations rather than high-flex moving applications. The cable carries motor power between the servo drive and servo motor and is rated IP65, helping protect the connection in machine environments exposed to dust and water. It is compatible with HF-KN, HF-KP and HF-MP series servo motors, as well as HG-KR and HG-MR series motors. Mitsubishi Electric System Service documentation also lists it for MM-GKR series sensorless servo motors. This variant belongs to the SC-PWS1CBL direct-connection power cable series. Typical applications include connecting Mitsubishi servo amplifiers to servo motors in packaging, assembly, small CNC, and general factory automation machinery. Because the L version is the standard fixed-part cable, it should be selected where cable movement is limited and a high-flex cable is not required.
Mitsubishi SC-PWS1CBL9M-A1-L 9 m Servo Motor Power Cable for HG-KR/HG-MR/HF-KN/HF-KP/HF-MP
SKU: SC-PWS1CBL9M-A1-L
The Mitsubishi SC-PWS1CBL9M-A1-L is a 9-meter servo motor power cable intended for direct connection between a servo amplifier and a servo motor. It is a load-side lead with a servo amplifier connector and a servo motor connector, and the L designation identifies the standard cable type for fixed installation. The SC-PWS1CBL series uses angled connectors and is specified with IP65 protection, which helps with routing in machine cabinets and equipment frames. The cable is compatible with HG-KR, HG-MR, HF-KN, HF-KP, and HF-MP series servo motors. Mitsubishi also notes that the same power cable type can be used with MM-GKR series sensorless servo motors. Its 9 m length suits installations where the drive and motor are separated, and the fitted connectors simplify connection to the amplifier and motor. It is used in MELSERVO servo systems and other servo-driven machinery that requires a reliable motor power connection over an extended cable run.
Mitsubishi SC-PWS1JCBL05M-A1H High-Flex Servo Power Cable for HG-KR/HF Series
SKU: SC-PWS1JCBL05M-A1H
The Mitsubishi SC-PWS1JCBL05M-A1H is a high-flex power cable and cordset for servo motor junction connection, supplied in a 0.5 m length with a servo amplifier connector and a servo motor connector. It is designed as a load-side lead with lead-out and is built for high bending endurance and long bending life in moving-axis wiring. Mitsubishi Electric lists the cable as compatible with HG-KR, HG-MR, HF-KN, HF-KP and HF-MP series servo motors and identifies it as equivalent to SCPWS1. The manufacturer description references MR-J3 power cable junction motor side, making it suitable for servo amplifier-to-motor connections in compact motion systems where a short, flexible cable run is required. Typical uses include connecting servo drives and servo motors in machine automation, robotics and other positioning equipment that requires a durable junction cable. Use it as a replacement for the specified part number where the original cable length and connector arrangement match. Confirm the servo series and connector configuration before ordering.
Mitsubishi SC-PWS1JCBL2M-A1-L Servo Power Cable for HG-KR, HG-MR & HF Series, 2 m
SKU: SC-PWS1JCBL2M-A1-L
The Mitsubishi SC-PWS1JCBL2M-A1-L is a 2 m servo power cable and cordset for direct connection between a Mitsubishi Electric servo amplifier and servo motor, with a load-side lead-out. It is fitted with a servo motor connector and a servo amplifier connector, allowing the motor power circuit to be connected without separate field wiring. The cable is intended for Mitsubishi Electric servo systems using MR-J4W-series amplifiers and HG-KR, HG-MR, HF-KN, HF-KP or HF-MP series motors. Its 2 m length suits compact machine layouts, while the load-side configuration routes the cable from the motor side as specified. The L designation identifies the standard-flexibility version for fixed-part use. Typical applications include servo-driven axes in machine tools, packaging machinery, handling equipment, and other systems where a short, pre-terminated power connection is required. Check the amplifier and motor series before ordering.
Mitsubishi SC-PWS3CBL10M-A1-H Power Cable for MM-GKR Series Motors
SKU: SC-PWS3CBL10M-A1-H
The Mitsubishi SC-PWS3CBL10M-A1-H is a power cable designed for MM-GKR series motors. It belongs to the SC-PWS direct-connect cable range, which uses an angled connector and is available in lengths from 1 to 10 m; this version is 10 m long. The A1 code identifies load-side lead-out, while the H suffix denotes a high-flex-life cable intended for repeated bending in moving machine sections. The cable is rated IP65 for protection against dust and water jets when mated, making it suitable for compact machines and automated equipment where motors are installed in confined or exposed locations. Its power conductors connect the motor to the associated drive, and the flexible construction helps reduce stress in cable carriers and articulated mechanisms. The SC-PWS3CBL10M-A1-H is typically used as a replacement or original build cable for MM-GKR motor installations, where correct length, connector orientation, and flex rating are important for reliable operation and maintenance. Install it according to Mitsubishi's wiring and bend-radius instructions.
Mitsubishi SC-PWS3CBL5M-A2-L 5 m Shielded Servo Motor Power Cable for HG-KR/HG-MR/HF-KN/HF-KP/HF-MP Series
SKU: SC-PWS3CBL5M-A2-L
The Mitsubishi SC-PWS3CBL5M-A2-L is a 5 m shielded servo motor power cable for direct connection between a servo amplifier and a servo motor, with the motor lead exiting opposite the load side. It is supplied with a servo amplifier connector and a servo motor connector, and its angled connector bodies help routing in confined machine spaces. The cable uses 18 AWG conductors and a shielded construction that suppresses switching noise emitted from the power cable, making it suitable for EMC-sensitive installations. When connected, the connector assemblies are rated IP65. It is compatible with Mitsubishi Electric HG-KR, HG-MR, HF-KN, HF-KP and HF-MP series servo motors and is intended for MR-J3 and MR-J4 AC servo systems. Typical applications include servo-driven machinery and motion-control axes that require a reliable, noise-resistant motor power connection.
Mitsubishi SC-PWS3CBL7M-A2-H 7 m High-Flex Shielded Servo Motor Power Cable for HG-KR/HG-MR/HF-KN/HF-KP/HF-MP Motors
SKU: SC-PWS3CBL7M-A2-H
The Mitsubishi SC-PWS3CBL7M-A2-H (SC-PWS3CBL7M-A2-H) is a 7 m shielded servo motor power cable with an amplifier-side connector and a motor-side connector, intended for direct connection between a Mitsubishi servo amplifier and servo motor. Its A2 configuration places the lead opposite the load side, while the H designation denotes high bending life for applications where the cable is subjected to repeated flexing. The shielded construction supports reliable power transmission in motion-control wiring, and the 7 m length gives layout flexibility without an intermediate junction. It is compatible with HG-KR, HG-MR, HF-KN, HF-KP, and HF-MP servo motors in Mitsubishi MELSERVO AC servo systems. The cable is suited to servo axes that need a durable, flexible power connection, including continuously moving machine arrangements. Use it where a direct amplifier-to-motor power cable with a long bending life is required, and confirm connector orientation and cable routing against the machine design.
Mitsubishi SC-PWS4CBL10M-LL Servo Motor Power Cable for HG-KR/HG-MR/HF-KN/HF-KP/HF-MP Series
SKU: SC-PWS4CBL10M-LL
The Mitsubishi SC-PWS4CBL10M-LL is a 10 m servo motor power cable designed for direct connection between a servo amplifier and a servo motor. It uses thick wire and is fitted with a servo amplifier connector and a servo motor connector, allowing a complete power connection to be made without separate field wiring. The cable has an IP20 protection rating and is suitable for use in protected machine wiring environments. It is compatible with Mitsubishi Electric HG-KR, HG-MR, HF-KN, HF-KP, and HF-MP series servo motors and is used in MELSERVO servo systems. The 10 m length supports installations where the amplifier and motor are separated within the machine, while the connector arrangement simplifies replacement and reduces installation time. Typical applications include motion-control axes and other servo-driven machinery that uses compatible Mitsubishi servo motors. The part is identified by Mitsubishi part number SC-PWS4CBL10M-LL and is also referenced as an equivalent to SCPWS4CBL10MLL.
Mitsubishi SC-PWS4CBL15M-LL 15 m Servo Motor Power Cable for HG-KR/HG-MR/HF Series
SKU: SC-PWS4CBL15M-LL
The Mitsubishi SC-PWS4CBL15M-LL (SC-PWS4CBL15M-LL) is a 15 m servo motor power cable and cordset for direct connection between a servo amplifier and a servo motor. It uses thick wire construction and is supplied with a servo amplifier connector and a servo motor connector, allowing the motor power circuit to be connected without separate connector assembly. The cable is intended for MELSERVO systems and is compatible with HG-KR, HG-MR, HF-KN, HF-KP, and HF-MP series motors. It has an IP20 degree of protection, a 15 m cable length, and is equivalent to part number SCPWS4CBL15MLL. The manufacturer describes it as a J3 power cable, 15 meters, splice amp side. Typical use is servo motor power wiring in machine axes and automation equipment where a pre-terminated cable and a longer run are required. Install it in protected cabinets or machine enclosures consistent with the IP20 rating. Confirm the servo amplifier and motor connector series before ordering.
Mitsubishi SC-PWS4CBL20M-LL 20 m Servo Power Relay Cable for HG/HF Series
SKU: SC-PWS4CBL20M-LL
The Mitsubishi SC-PWS4CBL20M-LL is a 20 m servo power relay cable for Mitsubishi general-purpose AC servo systems. It is the amplifier-side cable in a relay connection and is used together with the matching motor-side relay cable to carry servo motor power between the amplifier and the motor. The LL suffix identifies a standard fixed-installation type with thick wire, suitable for stationary cable runs rather than continuous flexing. The cable is intended for Mitsubishi HG-KR, HG-MR, HF-KN, HF-KP, and HF-MP series servo motors. Its wire construction is listed to UL758 AWM Style 2586, and the product is covered by the UL Wiring Harness Program and complies with the European RoHS directive. Available cable lengths in the SC-PWS4CBL series are 1 to 50 m in 1 m increments, with the 20 m length indicated by the model code. Typical use is power wiring in servo axes on industrial machines and equipment where a separate amplifier-side and motor-side relay cable arrangement is required. Confirm the matching motor-side cable and total relay length before ordering.
Mitsubishi SC-PWS4JCBL5M-A1-L Servo Motor Power Cable for HG-KR/HG-MR/HF-KN/HF-KP/HF-MP Series
SKU: SC-PWS4JCBL5M-A1-L
The Mitsubishi SC-PWS4JCBL5M-A1-L (SC-PWS4JCBL5M-A1-L) is a 5-meter servo motor power cable assembly for the junction connection between a Mitsubishi servo amplifier and a servo motor. It is supplied as a cable set with a servo amplifier connector and a servo motor connector, and the cable outlet is on the load side. The assembly is compatible with HG-KR, HG-MR, HF-KN, HF-KP, and HF-MP series servo motors. Its protection degree is 20, and the cable length is 5 meters. The cable is intended for power transmission in MELSERVO servo systems and is used in maintenance, repair, and replacement work where the original Mitsubishi cable assembly must be matched to the motor and amplifier connectors. Typical applications include servo-driven machinery and equipment that use the listed motor series. The part number is SC-PWS4JCBL5M-A1-L.
Mitsubishi SC-PWS5CBL10M-LH High-Flex Servo Motor Power Cable for HG-KR/HG-MR/HF Series 10 m
SKU: SC-PWS5CBL10M-LH
The Mitsubishi SC-PWS5CBL10M-LH is a high-flex servo motor power cable designed for direct connection between a servo amplifier and a servo motor. It is supplied as a 10 m cable set with a servo amplifier connector and a servo motor connector, and it has an IP65 protection rating for use in demanding machine environments. The high-flex construction provides elevated flex life, making the cable suitable for applications where continuous movement places mechanical stress on the cable. It is compatible with Mitsubishi HG-KR, HG-MR, HF-KN, HF-KP, and HF-MP series servo motors. Typical uses include power wiring for servo-driven machinery, positioning equipment, and compact automation systems that require a durable motor connection. The pre-assembled connector set helps simplify installation and replacement while supporting reliable servo power transmission in repetitive-motion applications. Its 10 m length gives installers useful separation between the servo amplifier and motor in machine layouts.
Mitsubishi SC-PWS5JCBL2M-A1-S Hi-Flex Servo Motor Power Cable for HG-KR HG-MR HF-KN HF-KP HF-MP Series
SKU: SC-PWS5JCBL2M-A1-S
The Mitsubishi SC-PWS5JCBL2M-A1-S (SC-PWS5JCBL2M-A1-S) is a 2 m Hi-Flex servo motor power cable designed for the junction connection between a servo amplifier and a servo motor. It is a load-side lead-out type (A1) and is supplied with a servo amplifier connector and a servo motor connector for a complete cordset. The cable features ultra-high bending endurance for long bending life, making it suited to repeated flexing in moving machine axes. Its IP65 degree of protection supports use in environments where dust and water ingress protection is required. It is compatible with Mitsubishi HG-KR, HG-MR, HF-KN, HF-KP, and HF-MP series servo motors. The 2 m length offers layout flexibility for compact machine builds, while the Hi-Flex construction helps reduce cable stress in continuous motion applications. Typical use is in servo-driven motion systems that require a reliable power connection between the drive and motor, including equipment built around the listed Mitsubishi motor families. The manufacturer describes the item as CBL ARM CBL HI FLEX A1 SPLICE 2 METERS.
Mitsubishi SC-PWS5JCBL2M-A2-S 2 m High-Flex Servo Motor Power Cable for HG-KR/HG-MR/HF-KN/HF-KP/HF-MP
SKU: SC-PWS5JCBL2M-A2-S
The Mitsubishi SC-PWS5JCBL2M-A2-S is a 2 m high-flex servo motor power cable for junction connections between a Mitsubishi Electric servo amplifier and servo motor. It is the lead opposite the load side and is supplied with a servo amplifier connector and a servo motor connector. The cable has an ultra-high bending endurance construction, also described as long bending life, for installations where the cable must withstand repeated flexing. Its connector interface is rated IP65 when mated, helping protect the connection in dusty or wet environments. It is compatible with HG-KR, HG-MR, HF-KN, HF-KP and HF-MP series servo motors. The assembly carries motor power on compact AC servo axes and is suited to machine builds that require a factory-terminated, plug-in cable rather than field wiring. Select it when the 2 m length, connector configuration and high-flex performance match the servo axis layout.
Mitsubishi SC-SAJ3PW2KC1M Servo Motor Power Cable for HC-SFS and HG-SR Series
SKU: SC-SAJ3PW2KC1M
The Mitsubishi SC-SAJ3PW2KC1M is a 1-meter servo motor power cable with a servo motor connector, intended for power wiring in Mitsubishi HC-SFS and HG-SR series servo motor systems. It is listed for renewal and retrofit use with 0.5 kW to 1.5 kW HC-SFS and HG-SR motors, and its ultra-high bending endurance supports long bending life in moving cable runs. The connector measures approximately 35 mm in diameter, and the cable weighs about 0.473 kg. Its 1-meter length helps with short motor-to-drive connections, while the flexible construction suits repetitive flexing in machine wiring. Typical uses include servo motor power wiring in motion control equipment, replacement of damaged motor cables, and renewal kits that update HC-SFS installations to HG-SR motors. The part is RoHS compliant and has a manufacturer product status of commercialized. It is identified as equivalent to SCSAJ3PW2KC1MS2.
Mitsubishi SC-SAJ3PW2KC1M-S2 Servo Motor Power Cable for HC-SFS/HG-SR 273382
SKU: SC-SAJ3PW2KC1M-S2
The Mitsubishi 273382 (SC-SAJ3PW2KC1M-S2) is a motor-side servo power cable and cordset for HC-SFS and HG-SR series servo motors in the 0.5 kW to 1.5 kW range. It is supplied as a 1 m power cable with a servo motor connector and ultra-high bending endurance for long bending life in moving-axis wiring. The cable is used in the power path between a servo motor and its drive in MELSERVO-based motion systems, including machinery that requires repeated flexing and compact routing. Its connector measures approximately 35 mm in diameter, and the cable weighs about 0.473 kg. The item is listed as a renewal power cable for HC-SFS and HG-SR motors and is equivalent to SCSAJ3PW2KC1MS2. Typical applications include servo axes on positioning equipment, production machinery, and other systems using these motor series. The cable is a standard RoHS-compliant item. Confirm the motor series, cable length, and connector details against the machine wiring before ordering.
Mitsubishi SCC110-HMV-7 High-Flex CC-Link Cable for High-Movement Sections
SKU: SCC110-HMV-7
The Mitsubishi SCC110-HMV-7 (SCC110-HMV-7) is a high-flexibility CC-Link dedicated communication cable and cordset designed for high-movement sections. It connects Mitsubishi Electric PLCs, CC-Link controllers, and other CC-Link-compatible devices in networks where the cable must withstand continuous flexing, such as moving machine axes and cable carriers. The cable uses an ETFE insulator and a flexible wire structure that achieve 1,000,000 bending cycles under specified test conditions. It is a UL-compliant product and is listed as the high-movement cable in Mitsubishi Electric's CC-Link cable range, equivalent to SCC110HMV7. Its communication protocol is CC-Link. When used alone, the maximum transmission distance is 70% of the maximum distance supported by the fixed-part CC-Link cable, so network length and voltage drop should be checked during layout. Typical applications include moving sections of PLC-controlled machinery and other CC-Link systems that require a durable high-flex communication cordset.
Mitsubishi SCENE4CBL55MH-MTH High-Flex Servo Encoder Feedback Cable 55 m IP65
SKU: SCENE4CBL55MH-MTH
The Mitsubishi SCENE4CBL55MH-MTH is a high-flex servo encoder feedback cable supplied as a 55-meter cable set for direct four-wire connection. It is designed for encoder feedback wiring in servo systems, where repeated flexing can shorten the service life of ordinary cables. The high bending endurance construction supports a long bending life, making the cable suitable for moving machine axes and other applications that need a durable feedback connection. The cable is rated IP65 for protection against dust and water ingress, and its 55-meter length allows encoder signals to be routed over longer distances. It is a Mitsubishi Electric cable intended for servo encoder feedback use, providing a direct-connection option for maintenance, replacement, or system integration. The four-wire construction is intended for direct connection, helping simplify installation where a long, flexible encoder cable is required. The part number is SCENE4CBL55MH-MTH.
Mitsubishi SCHAJ3ENM1C03M4-A1 Servo Encoder Feedback Cable Set for HC-KFS, HC-MFS, HG-KR and HG-MR Series
SKU: SCHAJ3ENM1C03M4-A1
The Mitsubishi SCHAJ3ENM1C03M4-A1 is a servo encoder feedback cable set designed for the load-side lead and cable output of Mitsubishi servo motor encoder connections. It is supplied as a 30 cm cordset with a junction connector and a servo motor connector, allowing the encoder signal to be routed from the motor through a junction connection. The cable is compatible with HC-KFS, HC-MFS, HG-KR, and HG-MR series servo motors, covering compact encoder wiring applications across these motor families. Its short 0.3 m length suits installations where the encoder connection is made close to the motor or through an intermediate junction. The part weighs approximately 0.136 kg and is identified by Mitsubishi material number 273379. Typical uses include servo axis maintenance, motor replacement, and encoder cable renewal on machinery that employs these motor series.
Mitsubishi SCHAJ3ENM1C03M4-A2 Servo Encoder Feedback Cable for HC-KFS/HC-MFS/HG-KR/HG-MR
SKU: SCHAJ3ENM1C03M4-A2
The Mitsubishi SCHAJ3ENM1C03M4-A2 (SCHAJ3ENM1C03M4-A2) is a servo encoder feedback cable/cordset supplied as a 30 cm assembly with a junction connector and a servo motor connector. It is a motor-side encoder conversion cable designed to carry encoder feedback between compatible Mitsubishi servo motors and their control or drive equipment. The cable is specified for HC-KFS, HC-MFS, HG-KR, and HG-MR series servo motors, so it can be used when replacing a damaged encoder lead or building a short connection in a servo motion system. Its connector arrangement combines a junction connector with the servo motor connector, matching the listed motor-side application. The 30 cm length is suited to compact installations where a short encoder cable run is required. Before installation, confirm the motor series, connector type, and cable length against the existing harness. Typical applications include servo motor maintenance, encoder feedback wiring, and replacement of motor-side encoder cables on Mitsubishi motion systems.
Shihlin Electric SC3-021-2.2K 2.2 kW Variable Frequency Drive for SC3 Series
SKU: SC3-021-2.2K
The Shihlin Electric SC3-021-2.2K is a 2.2 kW (3 HP) SC3-series variable frequency drive for single-phase 200–240 V AC input and three-phase 200–240 V AC motor output. It provides 11 A rated output current for speed control of three-phase induction motors in compact machinery and general equipment. The drive uses SVPWM, V/F and general flux vector control, with 150% overload for 60 seconds and 200% for 1 second. Its five-point adjustable V/F curve and PID feedback control help match motor performance to changing load conditions. Setup and operation are supported through the keypad, analog 0–10 V or 4–20 mA signals, and RS485 Modbus RTU communication, with dual Modbus interfaces rated up to 115200 bps. The unit includes a built-in RFI filter, DIN-rail mounting, and protection against overvoltage, undervoltage, overcurrent, phase loss, overload, inverter and motor overheating, hardware, communication and CPU faults. A 300 W, 60 Ω brake resistor is specified for this model when dynamic braking is required. Typical applications include conveyors, pumps, fans and other variable-speed motor-driven machinery.