Pièces d'automatisation industrielle
Parcourez les pièces CNC et d'automatisation industrielle avec livraison mondiale.
Rechercher des produits
Catégories
Mitsubishi SC-E5EW-SX25M CC-Link IE Field Ethernet Cable for MELSEC PLCs, 25 m
SKU: SC-E5EW-SX25M
The Mitsubishi SC-E5EW-SX25M is a 25 m (82 ft) CC-Link IE Field Ethernet cable assembly for MELSEC programmable controller networks. It combines a shielded RJ45 connector with an X-coded M12 connector, providing a straight Cat 5e connection for Ethernet communication. The cable is 1000BASE-T compliant and uses four twisted pairs with double shielding (aluminum/polyester tape plus tin-plated annealed copper braid) to help suppress external noise in control cabinets and machine installations. Its flame-retardant PVC jacket has an outside diameter of 6.8 mm, and the assembly is intended for indoor use. It conforms to IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801. The 25 m length is suitable for connecting CC-Link IE Field devices, PLC modules, and network components where a shielded cable run is required. With its RJ45 and X-coded M12 terminations, the SC-E5EW-SX25M supports reliable Ethernet connectivity in MELSEC-based automation systems.
Mitsubishi SC-E5EW-SX30M IE Field Ethernet Cordset for MELSEC PLCs, 30 m
SKU: SC-E5EW-SX30M
The Mitsubishi SC-E5EW-SX30M is an IE Field indoor Ethernet cable/cordset in the SC-E5EW series, supplied as a 30 m (98 ft) assembly with an RJ45 connector and an X-coded connector. It is designed for Mitsubishi MELSEC programmable controller systems and CC-Link IE Field/TSN network wiring in control cabinets and indoor installations. The cable is Category 5e or higher, double-shielded STP straight cable with eight wires arranged as four twisted pairs; the shielding combines aluminum/polyester tape with tin-plated annealed copper braid to resist external noise. It is compliant with IEEE 802.3 1000BASE-T, ANSI/TIA/EIA-568-B Category 5e and ISO/IEC 11801, supporting 1000BASE-T Ethernet links. The flame-retardant PVC sheath is suitable for indoor use, and the SC-E5EW series standard indoor construction has a 6.8 mm finished outside diameter. The assembly is a commercialized Mitsubishi Electric product and is equivalent to SCE5EWSX30M. Typical applications include PLC-to-PLC, PLC-to-switch and panel-to-panel Ethernet connections in MELSEC control systems, machine control cabinets, and CC-Link IE networks where a robust shielded cordset with an X-coded interface is needed.
Mitsubishi SC-E5EW-X10M CC-Link IE Field Ethernet Cable 10 m
SKU: SC-E5EW-X10M
The Mitsubishi SC-E5EW-X10M is a 10 m indoor Ethernet cable set for CC-Link IE Field networks. It is a Category 5e or higher, double-shielded STP straight cable with eight wires in four twisted pairs and two X-coded M12 connectors, one at each end. The double shield combines aluminum/polyester tape with a tin-plated annealed copper wire braid, providing strong shielding performance for reliable 1000BASE-T communication in electrically noisy factory automation environments. The cable is intended for indoor installation and for connecting CC-Link IE Field devices and Mitsubishi Electric FA equipment. Its 10 m length supports routing between control cabinets, machines and networked devices, while the straight M12 connectors provide compact termination at both ends. The SC-E5EW-X10M belongs to the Mitsubishi Electric SC-E5EW Ethernet cable series, which includes variants for indoor, indoor movable and indoor/outdoor installation. It is suitable for indoor CC-Link IE Field wiring where a shielded Category 5e cable with M12 connectors is required.
Mitsubishi SC-E5EW-X15M IE Field Ethernet Cable 15 m for CC-Link IE
SKU: SC-E5EW-X15M
The Mitsubishi SC-E5EW-X15M is an IE Field indoor Ethernet cable and cordset from the SC-E5EW series, supplied in a 15 m (49 ft) length with two X-coded connectors. It uses Category 5e or higher double-shielded STP straight cable with eight wires arranged as four twisted pairs; the shield combines aluminum/polyester tape with a tin-plated annealed copper braid to provide high resistance to external noise. The cordset is compliant with IEEE 802.3 1000BASE-T and is intended for shielded CC-Link IE Field network connections in PLC-based control systems. Its double-shield construction helps with EMI measures and with noise from adjacent cables in multi-cable layouts. Typical uses include indoor connections between Mitsubishi MELSEC PLC equipment and compatible CC-Link IE Field devices, as well as other Ethernet links that require a shielded 15 m cable assembly. The cable is equivalent to SCE5EWX15M.
Mitsubishi SC-E5EW-X1M CC-Link IE Field Ethernet Cable, M12 X-Coded, Indoor, 1 m, for MELSEC
SKU: SC-E5EW-X1M
The Mitsubishi SC-E5EW-X1M (SC-E5EW-X1M) is a 1 m (3 ft) indoor CC-Link IE Field Ethernet cable assembly with two X-coded M12 connectors. It belongs to the SC-E5EW cable series used with Mitsubishi Electric MELSEC PLC and CC-Link IE Field network installations, where it provides a straight Category 5e connection between compatible devices. Both ends are fitted with M12 connectors, and the assembly is intended for indoor control-cabinet and machine-level Ethernet wiring. Its 1 m length is suited to short-distance links in CC-Link IE Field networks. The cable is also identified as equivalent to SCE5EWX1M. When selecting or replacing the lead, confirm the connector coding, cable category, and installation environment against the equipment documentation. This pre-assembled Mitsubishi Ethernet cable is used for CC-Link IE Field networking in automated machinery and control systems.
Mitsubishi SC-E5EW-X2M CC-Link IE Field Indoor Ethernet Cable Set, 2 m
SKU: SC-E5EW-X2M
The Mitsubishi SC-E5EW-X2M (SC-E5EW-X2M) is an IE Field indoor Ethernet cable set from the SC-E5EW series. It is a Category 5e cordset fitted with two straight X-coded M12 connectors and has a 2 m (6 ft) length, designed for CC-Link IE Field network connections. The cable connects compatible MELSEC PLC equipment and CC-Link IE Field devices in indoor installations, where its M12 connectors provide a compact and secure Ethernet link. Its 2 m length suits short runs between control equipment and networked devices. The cable weighs approximately 0.206 kg. Typical applications include PLC-to-device wiring, machine network sections, and indoor control cabinets that use CC-Link IE Field. The cordset is supplied ready to use with connectors at both ends. Manufacturer order code SC-E5EW-X2M; equivalent designation SCE5EWX2M.
Mitsubishi SC-ECP01CBL2M-L Control Circuit Power Cable for MR-J3W Servo Amplifiers
SKU: SC-ECP01CBL2M-L
The Mitsubishi SC-ECP01CBL2M-L is a 2 m control circuit power cable and cordset designed for Mitsubishi Electric MR-J3W series servo amplifiers. It connects to the amplifier's CNP2-B(Y) port and is supplied with a PCB socket on one end and bare-end flying leads on the other, allowing direct termination in the cabinet. The cable uses #16 AWG conductors for the control-circuit power connection. The PCB socket and defined 2 m lead length help simplify wiring and replacement in servo-driven machinery. It is suitable for maintenance, repair, and original-equipment builds that use MR-J3W servo amplifier systems, where a dedicated control-circuit power lead is required. The part is identified by the manufacturer order code SC-ECP01CBL2M-L and serves as the control-circuit power cable for the specified amplifier interface. Installers should verify the CNP2-B(Y) port and MR-J3W compatibility against the machine documentation before installation.
Mitsubishi SC-ECP01CBL5M-L Servo Amplifier Control Circuit Power Cable for MR-J3W Series
SKU: SC-ECP01CBL5M-L
The Mitsubishi SC-ECP01CBL5M-L (model SC-ECP01CBL5M-L) is a 5 m control circuit power cable and cordset for Mitsubishi Electric servo amplifiers. It is designed for the CNP2-B(Y) port and combines a PCB socket at one end with bare-end flying leads at the other, allowing it to connect to the amplifier control-circuit interface and to be terminated in the cabinet. The cable uses #16AWG conductors, and its 5 m length gives installers additional routing flexibility in machine and panel layouts. It is compatible with the MR-J3W series and is intended for control-circuit power wiring in servo amplifier installations. The assembly is supplied as a standard control power cable and is listed by the manufacturer as commercialized. Use it when replacing or building the control-circuit power connection for MR-J3W servo systems, especially where a direct PCB connection and field-terminated leads are required.
Mitsubishi SC-EKCBL12M-H 12 m High-Flex Encoder Feedback Cable for MR-J4 Servo Systems
SKU: SC-EKCBL12M-H
The Mitsubishi SC-EKCBL12M-H is a 12 m high-flex servo encoder feedback cable set for Mitsubishi Electric MR-J4 series servo systems. It is supplied with a servo amplifier connector and a servomotor connector, allowing the encoder feedback circuit to be connected between the drive and motor in compatible MR-J4 installations. The cable has an IP20 protection rating and is designed for high flex resistance and long flex life, making it suitable for applications where the cable is subjected to repeated movement rather than only static routing. Its 12 m length supports layouts that require additional reach between the servo amplifier and servomotor while maintaining a dedicated encoder feedback connection. Typical uses include servo axis wiring in MR-J4-based machinery, motion systems and equipment where encoder signals must be carried reliably between the amplifier and motor. Installers should verify the connector configuration and cable routing requirements against the relevant MR-J4 system documentation before installation.
Mitsubishi SC-EKCBL15M-L 15 m Servo Encoder Feedback Cable for MR-J4
SKU: SC-EKCBL15M-L
The Mitsubishi SC-EKCBL15M-L servo encoder feedback cable is a 15 m cordset designed to carry encoder feedback between a servo motor and its amplifier. It has a servo amplifier connector and a motor-side junction connector, and the cable is rated IP20. It is compatible with load-side encoders or linear encoders and with HG-KR, HG-KN, HF-KP, HG-MR, and KN-MP series motors. The part is used with Mitsubishi MELSERVO MR-J4 servo systems, including standard one-axis and two-axis amplifier configurations. The 15 m length supports installations where the motor and drive are separated by a longer distance, while the connectors simplify wiring and replacement. Typical applications include servo-axis maintenance, machine retrofit, and repair of equipment using MR-J4 drives. The cable is supplied as a complete encoder feedback cordset for the drive-to-motor feedback circuit.
Mitsubishi SC-EKCBL8M-H 8 m High-Flex Servo Encoder Feedback Cable for MR-J4
SKU: SC-EKCBL8M-H
The Mitsubishi SC-EKCBL8M-H is an 8-meter high-flex servo encoder feedback cable designed for connecting a servo motor encoder to a Mitsubishi MELSERVO MR-J4 servo amplifier. It is supplied with a servo amplifier connector and a servo motor connector, allowing direct connection in place of a fabricated encoder lead. The cable's high-flex construction is intended for applications where the cable is subjected to repeated bending and movement, while its IP20-rated construction is suitable for protected cabinet and machine wiring environments. The 8-meter length provides reach between the drive and motor in larger machine layouts. Typical use is encoder signal transmission on MR-J4 servo axes, supporting precise speed and position feedback in motion-control systems. When installing, use the cable within the limits of the IP20 rating and confirm connector compatibility with the specific motor and amplifier configuration.
Mitsubishi SC-EMP01CBL2M-L Main Circuit Power Cable for MR-J3W/J4W2/J4W3 Servo Amplifiers
SKU: SC-EMP01CBL2M-L
The Mitsubishi SC-EMP01CBL2M-L (SC-EMP01CBL2M-L) is a 2 m primary-side main circuit power cable set for Mitsubishi MELSERVO servo amplifiers. It connects to the amplifier's CNP1 port and is supplied with a connector for the printed circuit board plus free terminal leads, allowing the cable to be terminated in the cabinet. The cable uses #14 AWG conductors and is intended for the main circuit power path rather than control or signal wiring. The part is listed for the MR-J3W series and is also shown in Mitsubishi documentation for MR-J4W2 and MR-J4W3 servo amplifiers. Typical uses include wiring the main power input of compatible servo drives in machine control panels, commissioning replacement drives, and servicing existing MELSERVO installations where the original power cable has been damaged or needs to be replaced. Its 2 m length and CNP1 connector arrangement make it suitable for direct connection between the amplifier and the panel power circuit.
Mitsubishi SC-EMP01CBL5M-L Main Circuit Power Cable for MR-J3W Servo Amplifiers
SKU: SC-EMP01CBL5M-L
The Mitsubishi SC-EMP01CBL5M-L is a main circuit power cable / cordset for Mitsubishi servo amplifiers, specifically the MR-J3W series. It is designed for the CNP1 port and is used for the primary-side main circuit power connection. The cable is 5 m long and is supplied with a PCB socket on one end and bare end flying leads on the other, allowing it to mate with the board-side connector while the free leads are terminated in the cabinet. Its cross-section is #14AWG, as specified for this main circuit power cable. The SC-EMP01CBL5M-L belongs to Mitsubishi's primary-side power cable range, alongside the 2 m SC-EMP01CBL2M-L version. It is intended for MR-J3W servo amplifier installations where a 5 m run is required between the amplifier's CNP1 main circuit power port and the power wiring. The PCB socket and flying-lead construction make it suitable for service replacement and for building or repairing servo drive cabinets. For compatible-series identification, use the MR-J3W series and the CNP1 port designation.
Mitsubishi SC-EPWS1CBL10M-A1H 10 m High-Flex Servo Motor Power Cable for MR-J4W2/J4W3
SKU: SC-EPWS1CBL10M-A1H
The Mitsubishi SC-EPWS1CBL10M-A1H is a 10 m high-flex servo motor power cable designed for direct connection between a rotary servo motor and a Mitsubishi MR-J4W2 or MR-J4W3 servo drive. The cable is supplied with a servo motor connector and a servo amplifier connector, allowing a complete motor-side power run to be installed without separate termination. Its A1 configuration indicates motor load-side cable exit, while the H suffix denotes the high-flex-life version, intended for applications where the cable is subjected to repeated flexing. The 10 m length supports direct connection layouts up to 10 m. Typical use includes servo axis wiring in multi-axis machines, positioning equipment, and other systems built around MR-J4W2 or MR-J4W3 drives. Use only with compatible Mitsubishi servo motors and drives, and observe the applicable bending-radius and installation requirements for high-flex cable.
Mitsubishi SC-EPWS1CBL10M-A2H High-Flex Servo Motor Power Cable 10 m for MELSERVO MR-J4W2/J4W3
SKU: SC-EPWS1CBL10M-A2H
The Mitsubishi SC-EPWS1CBL10M-A2H is a 10 m high-flex servo motor power cable set for direct connection between a Mitsubishi servo motor and servo amplifier. It is intended for MELSERVO MR-J4W2 and MR-J4W3 systems. In the product code, the A2 suffix denotes a motor lead-out on the side opposite the load, and the H suffix denotes the high-flex version. The assembly is supplied with a servo motor connector and a servo amplifier connector, so it connects directly to the motor and amplifier without field termination. Its high-flex design is intended for applications that require elevated bending life, such as moving axes on machine tools, robotics, and other motion-control equipment. The 10 m length allows the servo motor and amplifier to be installed at a greater distance within the machine. Confirm the amplifier model, motor series, and cable routing requirements against Mitsubishi's selection tables before ordering. The cable is suitable as a spare or replacement part for maintaining servo drive connections in compatible MELSERVO MR-J4W installations.
Mitsubishi SC-ERG01CBL2M-L Regeneration Unit Cable for MR-J3W Series
SKU: SC-ERG01CBL2M-L
The Mitsubishi SC-ERG01CBL2M-L is a 2-meter regeneration option cable set for Mitsubishi Electric MR-J3W series servo amplifiers. It connects to the CNP2-A(X) regeneration option port and is supplied with a PCB connector plus free terminal leads, allowing the cable to be routed and terminated inside the servo drive cabinet. The cable uses 14 AWG conductors and carries the P+ and C regeneration-option connections. Its 2 m length is suitable for standard panel layouts where the regenerative option is mounted near the amplifier. This cable is used with MR-J3W servo systems, including the MR-J3W-0303B6-RT two-axis servo amplifier, for wiring the regenerative option circuit. It is a practical replacement or build cable for machine builders, maintenance teams, and repair workshops working on Mitsubishi MELSERVO MR-J3W motion-control equipment. The standard-type cable construction supports normal fixed installation in control cabinets and industrial machinery. Verify the connector and pinout against the amplifier manual before installation.
Mitsubishi SC-ERG01CBL5M-L Regenerative Option Power Cable for MR-J3W Servo Amplifiers
SKU: SC-ERG01CBL5M-L
The Mitsubishi SC-ERG01CBL5M-L (SC-ERG01CBL5M-L) is a 5-meter regenerative option power cable and cordset for Mitsubishi AC servo systems. It is designed for the CNP2-A(X) port and is used on the power-supply side of the regenerative option in MR-J3W series servo amplifier installations. The cable has a PCB socket at one end and bare end flying leads at the other, allowing it to connect to the circuit board and to the associated wiring. Its conductors are #14 AWG, and the assembly measures 5 m in length. The SC-ERG01CBL5M-L is suitable for MR-J3W servo systems that use a regenerative option, including power-supply wiring and connection between the servo amplifier and the regenerative components. It is a standard Mitsubishi cable for this series and is intended for use in compatible servo amplifier cabinets and machine control panels.
Mitsubishi SC-FR-PC RS-232 to RS-485/422 Programming Cable for FREQROL FR Inverters 88426
SKU: SC-FR-PC
The Mitsubishi 88426 (SC-FR-PC) is a 5-meter programming cable designed to connect a personal computer to Mitsubishi FREQROL FR series inverters. It converts an RS-232 serial connection to the RS-485/422 interface used by the inverter, allowing parameter setting, monitoring, and diagnostic communication through a PC. The cable is fitted with D-sub plugs on both ends, and its 5-meter length gives technicians useful reach when working between a computer and an inverter cabinet. The assembly weighs approximately 0.162 kg. It is intended for commissioning and maintenance work on FREQROL FR drives, where a reliable serial link is needed for setup and service tasks. The SC-FR-PC is a practical programming accessory for systems that require a direct PC-to-inverter connection rather than a permanent network interface. Its RS-232 to RS-485/422 design keeps the connection compatible with the serial ports and inverter communication terminals commonly found in drive cabinets. Use it for programming, parameter backup, and troubleshooting of compatible Mitsubishi inverter installations.
Mitsubishi SC-HAJ3ENM1C03M-A1 Motor-Side Encoder Conversion Cable for HC-KFS/HC-MFS to HG-KR/HG-MR
SKU: SC-HAJ3ENM1C03M-A1
The Mitsubishi SC-HAJ3ENM1C03M-A1 is a motor-side encoder conversion cable supplied in the Mitsubishi Electric renewal kit for converting HC-KFS or HC-MFS motor installations to HG-KR or HG-MR servo motors. It is the encoder cable that leads out at the motor shaft, providing the motor-side encoder connection required for compatible servo renewal or replacement work. The part is listed under Mitsubishi material number 273379 and is identified in Mitsubishi FA-Servo-Motion catalogs as a renewal-kit encoder cable. This cable is intended for Mitsubishi MELSERVO servo applications where HC-KFS or HC-MFS motors are being renewed with HG-KR or HG-MR motors. Its function is to carry encoder feedback from the motor side to the servo system, supporting correct position feedback after the motor change. The catalog lists the product as active, in logistic class B, with a weight of approximately 0.136 kg. It is suitable for servo-axis maintenance, motor replacement, and renewal projects that require the correct motor-side encoder lead-out.
Mitsubishi SC-HAJ3ENM1C03M-A2 Motor-Side Encoder Conversion Cable for HC-KFS/HC-MFS to HG-KR/HG-MR Servo Motor Renewal
SKU: SC-HAJ3ENM1C03M-A2
The Mitsubishi SC-HAJ3ENM1C03M-A2 is a motor-side encoder conversion cable supplied as a renewal kit component for HC-KFS and HC-MFS to HG-KR and HG-MR servo motor changes. It provides the encoder lead-out connection needed when renewing encoder wiring on compatible Mitsubishi servo motor and drive installations. The cable carries Mitsubishi material number 273380 and is listed as a standard material with logistics class B. Its net weight is approximately 0.146 kg. Typical use is in Mitsubishi FA servo motion applications where HC-KFS, HC-MFS, HG-KR or HG-MR motors are installed and the encoder circuit must be adapted during renewal. The motor-side design helps complete the feedback path between the encoder and the servo drive, allowing the replacement motor and encoder interface to be connected within the renewal kit. RoHS status for this item is listed as not in scope. Verify the motor series, drive compatibility and connector arrangement against Mitsubishi documentation before installation.
Mitsubishi SC-HAJ3ENM3C1M Motor-Side Encoder Conversion Cable Set for HC-SFS HG-SR 273381
SKU: SC-HAJ3ENM3C1M
The Mitsubishi 273381 (SC-HAJ3ENM3C1M) is a motor-side encoder conversion cable set for Mitsubishi Electric servo systems. It is a 1 m cordset that connects an encoder connector to a servo motor connector and is supplied with a junction connector plus a servo motor connector. The cable is intended for HC-SFS and HG-SR series servo systems and is used in servo renewal installations for MR-J2S, MR-H, MR-J and MR-SA systems. Its design allows feedback wiring to be adapted at the motor side while retaining the existing cable-side connector and wire arrangement. The cable set is equivalent to SCHAJ3ENM3C1M. Net weight is approximately 0.312 kg, and the individual package measures about 23.5 x 23.5 x 5 cm. Typical applications include replacement, conversion and maintenance of encoder feedback connections on compatible Mitsubishi servo axes where a 1 m cable and correct motor-side interface are required.
Mitsubishi SC-HAJ3ENM3C1M4 Servo Encoder Feedback Cable for HC-SFS & HG-SR Series
SKU: SC-HAJ3ENM3C1M4
The Mitsubishi SC-HAJ3ENM3C1M4 is a 1 m servo encoder feedback cable/cordset with a junction connector and a servo motor connector. It provides an encoder-to-servo-motor cable connection and is compatible with HC-SFS and HG-SR series motors. The assembly is intended for feedback wiring in Mitsubishi servo systems, where a ready-made cordset with motor-side and junction connectors simplifies installation, maintenance, and replacement. It is also described as an encoder conversion cable/cordset equivalent to SCHAJ3ENM3C1M. The 1 m length makes it suitable for compact servo arrangements and for replacing damaged or unsuitable feedback cables in machines using HC-SFS or HG-SR motors. The cable set is used in servo motion applications that require a short, pre-terminated encoder feedback connection between the motor encoder and the associated drive wiring. Its connector configuration includes a junction connector plus a servo motor connector, matching the stated encoder-connector-to-servo-motor-connector design.
Mitsubishi SC-HAJ3PW1C1M Motor-Side Power Conversion Cable for MELSERVO MR-J2S
SKU: SC-HAJ3PW1C1M
The Mitsubishi SC-HAJ3PW1C1M (SC-HAJ3PW1C1M) is a motor-side power conversion cable for Mitsubishi MELSERVO servo systems. It is a 1 m cordset fitted with a servo motor connector and a servo amplifier connector, used to carry power between the drive and motor in a servo axis. The cable is compatible with the MR-J2S series and is also listed as a renewal-kit power cable for HC-SFS and HG-SR 2 kW to 5 kW servo motors. Its manufacturer description is PWR SUPPLY CONV CBL MTR SIDE, and the equivalent designation SCHAJ3PW1C1M can help when cross-referencing older documentation. The part is intended for servo motion repair, renewal, and maintenance work where the original motor-side power cable must be replaced. It has a net weight of approximately 0.824 kg and is supplied as a standard material item. Confirm the connector configuration and cable length against the existing installation before ordering.
Mitsubishi SC-HAJ3PW1C1M-A2 1-Meter Servo Motor Power Cable for MR-J2S Series
SKU: SC-HAJ3PW1C1M-A2
The Mitsubishi SC-HAJ3PW1C1M-A2 is a 1-meter servo motor power cable and cordset designed to connect a servo motor to its servo amplifier. It is supplied with a servo motor connector and a servo amplifier connector, so it can be used as a complete power lead for compatible MR-J2S series drive systems. The cable is listed as equivalent to SCHAJ3PW1C1M and appears in Mitsubishi renewal-kit documentation for HC-SFS and HG-SR 2 kW to 5 kW servo power cabling. Its one-meter length supports compact cabinet and machine layouts while keeping the motor and drive connections direct. The cable is RoHS compliant and has a net weight of approximately 0.824 kg. Typical applications include servo-driven machinery, positioning axes, and replacement or renewal work on Mitsubishi MELSERVO systems where the original motor power lead needs to be replaced. Confirm the drive series, motor rating, and connector type before ordering.
Mitsubishi SC-J2SBJ4CSET-01 Amplifier Renewal Cable Set for MR-J2S-B to MR-J4-B 7 kW or Less
SKU: SC-J2SBJ4CSET-01
The Mitsubishi SC-J2SBJ4CSET-01 is a B-type amplifier renewal cable set for replacing MELSERVO MR-J2S-B servo amplifiers with MR-J4-B models rated at 7 kW or less. It is intended for conversions where the existing MR-J2S external I/O and encoder cables will continue to be used. The kit contains the SC-J2SBJ4CT1C03M control signal conversion cable, the SC-J2SJ4ENC03M amplifier-side encoder conversion cable, and the SC-J2SJ4CTPWC5M DC24V power connection cable. The control signal cable converts the existing MR-J2S-B CN3 external I/O wiring for use with the MR-J4-B amplifier, helping minimize changes to the upper controller and existing wiring. This makes the set useful for replacing a single axis in a multi-axis system and for servo upgrade projects that need to preserve existing cabling. The cable set weighs approximately 0.288 kg and is RoHS compliant. Mounting attachments and the MR-J4-T20 conversion unit are not included and must be ordered separately when required.
Mitsubishi SC-J2SBJ4CSET-02 Type B Signal Conversion Cable Set for MR-J2/MR-J4 Servo Amplifiers
SKU: SC-J2SBJ4CSET-02
The Mitsubishi SC-J2SBJ4CSET-02 (SC-J2SBJ4CSET-02) is a Type B signal conversion cable set for MELSERVO MR-J2 and MR-J4 servo amplifier systems, intended for amplifier capacities of 11 kW and higher. It provides the cabling needed to adapt control, encoder, and power connections when integrating an MR-J4 amplifier in place of an MR-J2S series unit. The set contains one control signal conversion cable, one encoder conversion cable, and one 24 Vdc power connection cable. It supports SSCNET communication and is fitted with a servo amplifier connector. The cable set is used in servo drive replacement, retrofit, and maintenance work where the original amplifier wiring must be matched to the replacement unit's interfaces. Its bundled three-cable configuration groups the control, feedback, and 24 Vdc power circuits for the conversion.
Mitsubishi SC-J2SBJ4CT1C03M Control Signal Cable for MR-J2S-B to MR-J4-B Renewal Kit
SKU: SC-J2SBJ4CT1C03M
The Mitsubishi SC-J2SBJ4CT1C03M (SC-J2SBJ4CT1C03M) is a control signal cable in the MR-J2S-B to MR-J4-B renewal kit for servo amplifier replacements rated under 7 kW. It is the control-signal conversion cable within the SC-J2SBJ4CSET-01 amplifier-side conversion cable set, used when an existing MR-J2S-B servo system is upgraded to the MR-J4-B series. The cable connects to the existing MR-J2S-B CN3 external input/output signal connection and converts it to the MR-J4-B pin layout, allowing existing external I/O wiring to remain in service. It is intended for B-type MR-J2S and MR-J4 servo amplifier combinations under 7 kW and for installations that continue using the original J2S external I/O or encoder cables. The cable construction uses AWG28 x 10P and AWG24 conductors with PVC insulation; the AWG28 and AWG24 conductor outer diameters are approximately 0.38 mm and 0.64 mm. The part carries Mitsubishi material number 295829. Typical use is servo drive renewal and retrofit projects where minimal rewiring is required.
Mitsubishi SC-J2SBJ4KT02K Servo Amplifier Renewal Kit for MR-J2S-B to MR-J4-B 100/200 W
SKU: SC-J2SBJ4KT02K
The Mitsubishi SC-J2SBJ4KT02K is a servo amplifier renewal kit for converting MR-J2S-B servo amplifier installations to MR-J4-B units in 100/200 W applications. Mitsubishi Electric lists it in the FA-Servo-Motion other option group as a renewal kit with material number 271221. It supports MELSERVO replacement projects and is specified for 200 V HC-MFS series servo motors, including standard and brake-equipped versions used in small-capacity, ultra-low-inertia axes. The kit measures approximately 62 mm wide, 204 mm high and 135 mm deep, with a weight of about 0.9 kg, and it is RoHS compliant. Mitsubishi's replacement documentation describes first-stage servo amplifier replacement, later servo motor replacement and combined replacement procedures. In a typical 100/200 W axis, the kit provides the connection interface between the existing MR-J2S-B installation and the replacement MR-J4-B servo amplifier, allowing the drive to be renewed as part of a planned MELSERVO upgrade.
Mitsubishi SC-J2SBJ4KT06K MR-J2S-B to MR-J4-B Renewal Kit for MELSERVO 400/600 W Servo Drives
SKU: SC-J2SBJ4KT06K
The Mitsubishi SC-J2SBJ4KT06K is a renewal kit for replacing MR-J2S-B series servo amplifiers with MR-J4-B series units in 400 W and 600 W MELSERVO applications. It is supplied under Mitsubishi material number 271222 and is listed as a standard-material other option for MELSERVO AC servo amplifiers. The kit supports migration from the older MR-J2S-B drive platform to the MR-J4-B platform, allowing a machine’s servo axis to be renewed with the newer drive family. Its product dimensions are approximately 70 mm wide, 204 mm high and 170 mm deep, with a weight of about 1 kg. The assembly is RoHS compliant and is intended for FA servo motion applications. Typical uses include servo-axis renewal and retrofit projects on industrial machines that use Mitsubishi MELSERVO amplifiers and require a planned replacement of MR-J2S-B drives rather than a like-for-like service part.
Mitsubishi SC-J2SBJ4KT1K Servo Amplifier Renewal Kit for MR-J2S-B to MR-J4-B 700 W/1 kW
SKU: SC-J2SBJ4KT1K
The Mitsubishi SC-J2SBJ4KT1K is a servo amplifier renewal kit for converting MELSERVO MR-J2S-B servo axes to MR-J4-B operation in 700 W/1 kW class systems. It is part of Mitsubishi Electric's MELSERVO renewal tool range and is intended to replace an existing MR-J2S-B amplifier while retaining the upper controller and existing wiring, which helps simplify migration and reduce rewiring work. The kit can also be used for single-axis replacement within a multi-axis system, and it allows MR-J2S-series servo motors to be driven by an MR-J4 amplifier. The unit measures approximately 82 mm in width, 216 mm in height and 202 mm in depth, with a weight of approximately 1.5 kg. Where the original MR-J2S amplifier used its internal interface power, a separate 24 V DC supply with at least 80 mA capacity is required. Typical applications include retrofits of legacy MELSERVO J2S equipment, staged servo drive upgrades and maintenance projects that need to preserve existing control hardware and cabling.
Mitsubishi SC-J2SBJ4KT3K MR-J2S-B to MR-J4-B 2 kW/3.5 kW Servo Drive Renewal Kit
SKU: SC-J2SBJ4KT3K
The Mitsubishi SC-J2SBJ4KT3K (SC-J2SBJ4KT3K) is a renewal kit for converting MR-J2S-B servo amplifier installations to the MR-J4-B series in 2 kW and 3.5 kW applications. It is intended for MELSERVO servo drive upgrades where existing MR-J2S-200B or MR-J2S-350B amplifiers are replaced by MR-J4-B amplifiers with an SSCNET conversion unit. The kit provides mechanical and electrical adaptation components, including a TE bracket for main-circuit and control-power conversion, a mounting bracket, an amplifier base and M5 x 12 servo amplifier mounting screws. Its package measures 107 mm wide, 250 mm high and 202 mm deep and weighs 1.9 kg. The product is RoHS compliant and carries material number 271224. Typical uses are servo drive renewal and maintenance in machinery that runs MELSERVO J2S series equipment, allowing the motion control hardware to be updated while retaining the machine's existing drive arrangement. Installation should follow Mitsubishi Electric's renewal kit instructions and the applicable MR-J4-B drive documentation, particularly for regenerative option wiring, terminal connections and encoder cable compatibility.
Mitsubishi SC-J2SBJ4KT5K Servo Amplifier Renewal Kit for MR-J2S-B to MR-J4-B 5 kW
SKU: SC-J2SBJ4KT5K
The Mitsubishi SC-J2SBJ4KT5K (SC-J2SBJ4KT5K) is a servo amplifier renewal kit for converting 5 kW MR-J2S-B series installations to the MR-J4-B platform. It is identified by Mitsubishi material number 271225 and is intended for the replacement of the MR-J2S-500B servo amplifier with the MR-J4-500B-RJ020, together with the MR-J4-T20 SSCNET conversion unit as specified by Mitsubishi. The kit is supplied with a TE bracket for control-power conversion, an amplifier base mounting plate, eight M5×12 mounting screws, a control signal conversion cable, an amplifier-side encoder conversion cable, a DC24 V power connection cable and two cable ties. The assembly measures approximately 142.5 mm wide, 273 mm high and 208 mm deep and weighs about 1.3 kg. The renewal kit is RoHS compliant and is used in MELSERVO servo systems where MR-J2S-B 5 kW amplifiers are being renewed with MR-J4-B series equipment. It supports maintenance and modernization of servo-driven machinery by providing the mounting hardware and conversion cables required for the amplifier replacement. The part is suitable for MELSERVO MR-J2S-B to MR-J4-B upgrade projects and for spare-parts planning around 5 kW servo amplifier cabinets.
Mitsubishi SC-J2SBJ4KT7K Servo Amplifier Renewal Kit for MELSERVO MR-J2S-B to MR-J4-B 7 kW
SKU: SC-J2SBJ4KT7K
The Mitsubishi SC-J2SBJ4KT7K is a 7 kW servo amplifier renewal kit for converting MELSERVO MR-J2S-B installations to MR-J4-B drives. It is intended for replacing an existing MR-J2S-700B servo amplifier with an MR-J4-700B-RJ020 amplifier and MR-J4-T20 SSCNET conversion unit. The kit includes an amplifier base, eight MS×12 servo amplifier mounting screws, the SC-J2SBJ4CT1C03M control signal conversion cable, the SC-J2SJ4ENC03M amplifier-side encoder conversion cable, the SC-J2SJ4CTPWC5M DC24 V power connection cable, cable ties, and blue and yellow extension wires. Its dimensions are 180 mm width, 350 mm height, and 208 mm depth. The interface uses a recommended DC24 V supply of ±10% with a current capacity of at least 80 mA. The kit is RoHS compliant and is used when a 7 kW MELSERVO MR-J2S-B axis is upgraded to MR-J4-B control using the supplied conversion cables and mounting hardware.
Mitsubishi SC-J2SCPJ4CSET-01 CP-Type Amplifier-Side Conversion Cable Set for MR-J2/MR-J4 Servo Drives
SKU: SC-J2SCPJ4CSET-01
The Mitsubishi SC-J2SCPJ4CSET-01 (SC-J2SCPJ4CSET-01) is a CP-type amplifier-side conversion cable set for MR-J2 and MR-J4 servo amplifier applications rated at 7 kW or less. The set provides the wiring needed for servo-amplifier renewal and retrofit work, including a control signal conversion cable, a monitor conversion cable, an encoder conversion cable and a DC 24 V power connection cable. The included cable references are SC-J2SCPJ4CTC03M for control signal conversion, SC-J2SJ4MOC03M for monitor conversion, SC-J2SJ4ENC03M for encoder conversion and SC-J2SJ4CTPWC5M for the 24 V DC connection. It is intended for CP-type amplifier-side conversion in MELSERVO MR-J2 and MR-J4 servo systems, supporting renewal wiring between the amplifier and the machine cabinet. The cable set is used with compatible MR-J2 or MR-J4 amplifiers up to 7 kW in machine tools, industrial machinery and other servo-driven equipment. The amplifier and servo motor are not included.
Mitsubishi SC-J2SCPJ4CTC03M CP-Type Amplifier-Side Signal Control Conversion Cable for MR-J2S/MR-J4 Renewal Kits
SKU: SC-J2SCPJ4CTC03M
The Mitsubishi SC-J2SCPJ4CTC03M (SC-J2SCPJ4CTC03M) is a CP-type amplifier-side signal control conversion cable for Mitsubishi MELSERVO MR-J2S to MR-J4 renewal kits. It is used at the servo amplifier end to adapt the control-signal connection when a legacy MR-J2S installation is upgraded to MR-J4 equipment, allowing the renewal kit's control wiring to interface with the servo amplifier connector layout. Mitsubishi renewal-kit documentation identifies this item as CP-type-only, so correct selection depends on the servo amplifier configuration. The cable is a control-signal conversion assembly supplied with a servo amplifier connector, and it is specified for amplifier-side conversion in the renewal kit. Typical applications include servo amplifier retrofits, replacement projects and maintenance work where MR-J2S control signals must be transferred to MR-J4 servo amplifiers while preserving the existing panel connection arrangement. Installers should verify the CP-type renewal-kit configuration and servo amplifier model before fitting the cable.
Mitsubishi SC-J2SJ4CSET-01 Servo Amplifier Conversion Cable Set for MR-J2S-A to MR-J4-A Renewal up to 7 kW
SKU: SC-J2SJ4CSET-01
The Mitsubishi SC-J2SJ4CSET-01 is a renewal kit and amplifier-side conversion cable set for replacing MR-J2S-A servo amplifiers with MR-J4-A drives in systems rated 7 kW or less. It provides the cabling needed to adapt the existing amplifier wiring to the newer MR-J4-A series during a servo renewal, helping reduce rewiring work and downtime. The set contains control-signal, encoder, monitor, and DC 24 V connection cables; the individual cable part numbers shown in Mitsubishi documentation include SC-J2SJ4CTC03M, SC-J2SJ4ENC03M, SC-J2SJ4MOC03M, and SC-J2SJ4CTPWC5M. It is intended for MELSERVO MR-J2S-A to MR-J4-A conversions where the servo amplifier capacity is 7 kW or less. The kit weighs approximately 0.39 kg. Because some MR-J2S functions may not be fully compatible after conversion, the manufacturer's MR-J2S/J2M replacement guide should be used when planning installation. Typical applications include renewal of existing servo-driven machinery, production equipment, and automation systems that use MR-J2S-A amplifiers and require a controlled migration to MR-J4-A.
Mitsubishi SC-J2SJ4CSET-02 Type A Servo Amplifier Conversion Cable Set for MELSERVO MR-J2S/MR-J4 11 kW+
SKU: SC-J2SJ4CSET-02
The Mitsubishi SC-J2SJ4CSET-02 is a Type A servo amplifier conversion cable set for replacing MR-J2S series servo amplifiers with MR-J4 series units in 11 kW and higher systems. It provides the interface wiring needed to connect the existing MR-J2S installation to the new MR-J4 amplifier during a renewal. The set contains one control signal conversion cable, one monitor conversion cable, one encoder conversion cable, and one 24 VDC power connection cable (SC-J2SJ4CTPWC5M). A servo amplifier connector and multifunction Type A interface are used. If the existing MR-J2S amplifier uses its internal 24 VDC interface supply, a separate 24 VDC source with at least 80 mA capacity is required; the matching power connection cable is included in this set. For 30 kW and higher replacements, the converter unit GN1 input/output signal cable is not included. The cable set is intended for MELSERVO MR-J2S to MR-J4 servo renewal projects on industrial machinery, where the original amplifier-side signal, monitor, encoder, and 24 VDC connections must be adapted to the replacement drive.
Mitsubishi SC-J2SJ4CTC03M Control Signal Conversion Cable for MELSERVO MR-J2S-A to MR-J4-A Upgrade
SKU: SC-J2SJ4CTC03M
The Mitsubishi SC-J2SJ4CTC03M is a control signal conversion cable set for the MELSERVO MR-J2S-A to MR-J4-A renewal path. It is the amplifier-side conversion kit cable used when an MR-J2S series AC servo amplifier is replaced by an MR-J4 series unit in A-type applications for 11 kW and larger models, where the existing J2S encoder cable is retained. The set carries the control signals between the J4 CN1 interface and the CN1A and CN1B connectors, and it includes a lead for the DC 24 V power connection. Its construction uses AWG28 conductors in 18-pair and 13-pair control cables plus AWG24 conductors for the power lead, with PVC insulation. The cable set is a standard Mitsubishi renewal kit item, classified as a control signal cable, and is intended for servo amplifier retrofits where the original MR-J2S wiring and encoder cables are being reused. It supports the electrical interfacing needed to bring MR-J4 control and power connections into an existing MR-J2S cabinet. Typical use is in MELSERVO servo systems requiring a controlled drive upgrade while preserving the existing motor feedback cabling. The part is identified by Mitsubishi material number 295828 and carries a 12-month warranty.
Mitsubishi SC-J2SJ4CTPWC5M DC24V Power Supply Connection Cable for MR-J2S to MR-J4 Upgrade
SKU: SC-J2SJ4CTPWC5M
The Mitsubishi SC-J2SJ4CTPWC5M (SC-J2SJ4CTPWC5M) is a 5 m DC24V power supply connection cable used in Mitsubishi renewal kits that convert MR-J2S series servo amplifiers to the MR-J4 series. It provides the dedicated 24 VDC link required when a separate supply is used during replacement, with red conductor for the positive side and white for the negative side. The cable is intended for MR-J2S to MR-J4 B-type conversions rated up to 7 kW and is used together with the control-signal and encoder conversion cables in the renewal set. Its AWG24 construction has PVC insulation, insulation resistance of at least 15 MΩ·km, AC 2000 V withstand voltage for one minute, and an operating temperature range of -10 to 60°C without condensation. The minimum bending radius is 30 times the insulation outer diameter. Typical uses are servo-system retrofits, control-panel upgrades, and maintenance work where an existing MR-J2S installation is migrated to MR-J4 hardware. Confirm the amplifier type, kit contents, and 24 VDC supply capacity before installation.
Mitsubishi SC-J2SJ4ENC03M Encoder Conversion Cable for MR-J2S to MR-J4 Renewal
SKU: SC-J2SJ4ENC03M
The Mitsubishi SC-J2SJ4ENC03M (SC-J2SJ4ENC03M) is an encoder conversion cable set for replacing MR-J2S series servo amplifiers with MR-J4 series amplifiers while retaining the existing MR-J2S encoder cable. It is a 30 cm signal conversion cordset that connects on the amplifier side and terminates in a servo amplifier connector. The cable is compatible with MR-J2 and MR-J4 series equipment and is equivalent to SCJ2SJ4ENC03M. Mitsubishi identifies it as an A-type encoder conversion cable and lists it under renewal kit MR-J2S-A/B to MR-J4-A/B applications. It is intended for A-type MR-J2S to MR-J4 replacements at 11 kW and above when the original J2S encoder cable remains in use. The assembly weighs approximately 0.183 kg and carries material number 271231. Typical use is in servo drive upgrades and maintenance projects where the amplifier is changed but the existing encoder wiring is kept, reducing rework. This is a specific interface accessory for Mitsubishi MELSERVO systems, not a general-purpose cable. Verify the amplifier model, replacement type and encoder-cable retention plan before ordering.
Mitsubishi SC-J2SJ4FAN1C1M Motor-Side Cooling Fan Conversion Cable for MR-J2/MR-J4 Series
SKU: SC-J2SJ4FAN1C1M
The Mitsubishi SC-J2SJ4FAN1C1M is a 1 m motor-side cooling fan conversion cable, also described as a cooling fan power cable or cordset for the motor. It is fitted with a servo amplifier connector and is designed for MR-J2 and MR-J4 series servo systems, including compatibility with HA-LFS series motors. The cable is used on the motor side of the cooling fan circuit in MELSERVO applications and supports renewal work when replacing an MR-J2S series amplifier with an MR-J4 series amplifier. Its 1 m length and servo amplifier connector support routing and connection during maintenance or retrofit. Its outer diameter is approximately 9 mm according to the renewal-tool documentation. Typical applications include servo motor cooling fan power connection, drive replacement projects, and maintenance of MR-J2 and MR-J4 series installations. It is an equivalent to the SCJ2SJ4FAN1C1M reference.
Mitsubishi SC-J2SJ4KT02K Servo Amplifier Renewal Kit for MR-J2S-A to MR-J4-A 100/200W
SKU: SC-J2SJ4KT02K
The Mitsubishi SC-J2SJ4KT02K (SC-J2SJ4KT02K) is a MELSERVO renewal kit for replacing MR-J2S-A servo amplifiers with MR-J4-A units in 100 W and 200 W applications. It is designed to permit migration to the MR-J4 series without changing the upper controller or existing wiring, and it allows a single axis to be replaced in a multi-axis system. The kit is identified by Mitsubishi material number 271191 and is listed for 100 W and 200 W servo amplifier capacities. Its assembly measures approximately 50 mm in width, 168 mm in height and 135 mm in depth, with a weight of 1.1 kg. The kit is RoHS compliant. SC-J2SJ4KT02K does not include a mounting attachment, so the available installation space should be checked when planning a renewal. Typical use is in MELSERVO MR-J2S-A to MR-J4-A drive upgrades where the existing controller and wiring are retained.
Mitsubishi SC-J2SJ4KT06K Servo Amplifier Renewal Kit for MR-J2S-A to MR-J4-A 400/600 W 271192
SKU: SC-J2SJ4KT06K
The Mitsubishi 271192 (SC-J2SJ4KT06K) is a servo amplifier renewal kit designed to replace MR-J2S-A series drives with MR-J4-A series units in 400 W and 600 W applications. It allows the servo system to be renewed while retaining the existing upper controller and wiring, and in multi-axis machines it supports replacement of a single axis rather than a complete drive lineup. The kit is intended for MELSERVO servo systems and for first-time replacement or batch renewal projects where MR-J2S-A installations are updated to MR-J4-A technology. The kit carries the model SC-J2SJ4KT06K and material number 271192. Its dimensions are approximately 40 mm wide, 168 mm high, and 170 mm deep, with a net weight of 1.3 kg. It is RoHS compliant and is classified as a standard material in Mitsubishi's FA-Servo-Motion range. The renewal kit is supplied for servo amplifier capacities of 400 W and 600 W, helping maintain compatible axis operation in existing MELSERVO systems.
Mitsubishi SC-J2SJ4KT1K Servo Amplifier Renewal Kit for MELSERVO MR-J2S-A to MR-J4-A
SKU: SC-J2SJ4KT1K
The Mitsubishi SC-J2SJ4KT1K (SC-J2SJ4KT1K) is a servo amplifier renewal kit for converting MELSERVO MR-J2S-A installations to the MR-J4-A series. It is intended for MR-J4-A-RJ servo amplifiers with 700 W and 1 kW capacities and supports individual replacement as well as collective replacement work during a drive renewal. The kit carries Mitsubishi material number 271193 and is classified as standard material with logistic class C. The kit measures approximately 70 mm in width, 168 mm in height, and 190 mm in depth, and it weighs about 1.6 kg. It is used in maintenance and modernization projects where existing MR-J2S-A drives are replaced by MR-J4-A units, helping keep MELSERVO-based machinery in service. The renewal kit is suitable for production equipment that uses these servo drive series and requires the matched kit for the 700 W to 1 kW amplifier range.
Mitsubishi SC-J2SJ4PW1C03M-A2 Motor-Side Power Conversion Cable for MELSERVO J2S Renewal Kits
SKU: SC-J2SJ4PW1C03M-A2
The Mitsubishi SC-J2SJ4PW1C03M-A2 is a motor-side power conversion cable for MELSERVO J2S servo systems. It is listed in Mitsubishi renewal-kit material for HC-KFS and HC-MFS motors being renewed to HG-KR and HG-MR series motors, where it handles the motor-side power connection in the conversion. The A2 variant is configured with the connector lead-out direction on the side opposite the load, as shown in Mitsubishi's conversion-cable tables. The cable is made from standard material and is RoHS compliant; its logistics class is B and its weight is approximately 0.133 kg. It is intended for MELSERVO J2S maintenance, motor replacement and renewal projects that use the corresponding HC-KFS, HC-MFS, HG-KR or HG-MR servo motor families. Use it as the motor-side power cable in the matching renewal kit and confirm the connector direction and motor series before installation.
Mitsubishi SC-J2SJ4PW2C1M Servo Motor Power Cable for HC-RFS 11/15 kW Motors & MR-J2S Drives
SKU: SC-J2SJ4PW2C1M
The Mitsubishi SC-J2SJ4PW2C1M is a 1 m servo motor power cable / cordset designed to connect a compatible servo motor to its drive. It is supplied with a servo amplifier connector and a servo motor connector, allowing direct plug-in wiring between the cabinet and the motor. The cable is specified for use with Mitsubishi HC-RFS series 11 kW and 15 kW servo motors and MR-J2S series servo amplifiers. It is also identified as a motor-side power conversion cable for applications involving replacement of MR-J2S series amplifiers with MR-J4 series amplifiers, where the appropriate conversion cable is required. The cable has an outer diameter of approximately 14 mm, based on the published dimension table. Typical use is in MELSERVO-based motion systems, industrial machinery, and retrofit or renewal projects where a complete, connector-terminated power cable is needed for high-power servo motor circuits. The part is equivalent to the earlier designation SCJ2SJ4PW2C1M, so existing documentation may refer to either code. Always verify motor and amplifier series, connector type, and cable length against the installation before ordering.
Mitsubishi SC-J2SJ4PW3C1M-A1 Motor-Side Power Conversion Cable for MR-J2S Renewal 1 m
SKU: SC-J2SJ4PW3C1M-A1
The Mitsubishi SC-J2SJ4PW3C1M-A1 is a 1 m motor-side power conversion cable for Mitsubishi MR-J2S renewal projects. It has a load-side connector exit, identified by the A1 suffix, and is used in servo motor replacement applications in the 11–15 kW class, including HA-LFS to HG-JR conversions. The assembly is fitted with a servo amplifier connector and a servomotor connector, so it provides a direct power connection between the drive and motor in the renewal setup. The A2 version is the alternative for opposite-side routing. This cable is associated with MR-J2S servo systems and HA-LFS 11 kW and 15 kW motor applications where correct conductor routing and connector orientation are important during a retrofit. Typical use is in machine tools, industrial robots, and other servo-driven machinery undergoing drive or motor renewal. As a passive cable assembly, its performance depends on the specified Mitsubishi amplifier and motor. Verify the amplifier series, motor model, connector direction, and cable length against the machine documentation before ordering.
Mitsubishi SC-J2SJ4PW3C1M-A2 Motor-Side Servo Power Conversion Cable for HC-LFS 11/15 kW Motors and MR-J2S Amplifiers
SKU: SC-J2SJ4PW3C1M-A2
The Mitsubishi SC-J2SJ4PW3C1M-A2 is a 1 m motor-side servo power conversion cable for MELSERVO J2S servo systems. It connects an MR-J2S series servo amplifier to an HC-LFS series servo motor rated at 11 kW or 15 kW. The assembly is supplied with a servo amplifier connector and a servo motor connector, and the cable outlet is arranged on the side opposite the load. It is intended for the power path on the motor side of the servo system, supporting installation and maintenance work where the amplifier and motor are separated by a short cable run. The one-meter length suits applications where the servo amplifier and motor are mounted close together. Typical use includes MELSERVO J2S drive systems, HC-LFS motor connections, and renewal work involving compatible 11 kW or 15 kW servo motors. Check the amplifier series, motor series, and power rating against the machine documentation before ordering or installation.