Mitsubishi SC-J3ENSCBL25M-L Servo Encoder Feedback Cable for MELSERVO MR-J3

The Mitsubishi SC-J3ENSCBL25M-L is a 25 m servo encoder feedback cable supplied as a ready-to-use assembly with a connector for the servo amplifier and a connector for the servo motor. It carries encoder position and speed signals between a MELSERVO MR-J3 series servo drive and the motor, so that the amplifier can close the position loop with high resolution feedback. The shielded multi-core construction limits electromagnetic interference in cabinets and machine frames where drives, spindle motors and inverters run close together, while the connector interfaces are rated IP67 when fully mated with the servo amplifier or servo motor. The 25 m length suits larger machines where the drive cabinet sits away from the axis, such as machining centers, injection molding machines, robot cells, packaging lines and general positioning equipment. The cable is intended for HF-KN, HF-KP, HF-MP, HF-SP and HF-JP series servo motors driven by MELSERVO MR-J3 amplifiers, and it is supplied as a direct-connection set with both end connectors fitted. Verify the connector type against the motor and amplifier before installation, and route the cable with an adequate bend radius away from power lines.