Mitsubishi SC-BKC1JCBL2M-A1-L 2 m IP67 Electromagnetic Brake Cable for MELSERVO Servomotors

The Mitsubishi SC-BKC1JCBL2M-A1-L is a 2 m electromagnetic brake cable set for Mitsubishi MELSERVO servomotors and servo amplifiers. It carries the brake conductors from the motor junction to the drive, with a load-side cable outlet and a right-angle servomotor connector plus a servo amplifier connector. The cable is rated IP67, making it suitable for installations where the connection area must resist dust and water ingress. Its 2 m length supports short-to-medium runs between the motor and amplifier, while the A1 designation identifies the load-side lead-out direction. The cable belongs to the SC-BKC1JCBL brake-cable family used with Mitsubishi MELSERVO servo systems such as MR-JN, MR-J3, MR-J4 and MR-J5, and is typically used when installing or replacing a servo motor with an electromagnetic brake. It provides a dedicated brake wiring path instead of combining brake conductors with other servo cables, simplifying maintenance and replacement. The assembly is intended for compatible Mitsubishi servo motor and amplifier combinations; verify the connector type and lead-out direction against the original part before ordering.